Cyber Monday Deal: Up to 60% off InvestingProCLAIM SALE

Earnings call: Eltek Limited faces Q2 challenges but remains optimistic

EditorAhmed Abdulazez Abdulkadir
Published 16/08/2024, 12:34
© Reuters.
ELTK
-

Eltek Limited (ELTK), a global manufacturer and supplier of printed circuit boards (PCBs), reported a decrease in revenue and profit for the second quarter of 2024. The company faced production challenges, including a shift in customer orders towards medium technology PCBs, which command lower prices and margins, and production delays due to manpower constraints. Despite these setbacks, Eltek anticipates a return to profitability in the latter half of the year, supported by a strong defense sector demand and strategic investments in capacity expansion.

Key Takeaways

  • Eltek Limited reported a Q2 revenue of $10.5 million and a gross profit of $1.6 million, with a 16% gross margin.
  • A shift in key customer orders to medium technology PCBs and manpower-related production delays impacted profits.
  • The company remains confident in its long-term strategy and market position.
  • Eltek expects a return to profitability in the second half of 2024, with realigned product mix strategies.
  • The defense sector continues to drive demand, accounting for 60% of Q2 revenue.
  • Eltek is investing in three new coating lines to increase capacity and cater to advanced technological product demands.
  • The company plans to increase its workforce by 50 manufacturing employees by the end of the year.
  • Eltek aims to finance future deals with existing cash and debt, avoiding additional capital raising.

Company Outlook

  • Eltek forecasts a stronger performance in the upcoming quarters of 2024.
  • The company is focused on achieving a 27% gross margin despite the current product mix.
  • Total capital expenditures are expected to reach $10 million by the end of 2025.

Bearish Highlights

  • Q2 saw a decrease in revenue and profit due to lower-margin product sales and production delays.
  • The labor market in Israel is challenging, necessitating salary increases to attract manufacturing employees.

Bullish Highlights

  • Strong demand in the defense sector is likely to continue, with no change expected in the revenue contribution.
  • Eltek is optimistic about its capacity expansion and new coating lines enhancing its technological offerings.

Misses

  • The company missed its gross margin target for Q2, reporting 16% against a goal of 27%.

Q&A Highlights

  • Eltek plans to address manpower-related capacity constraints by hiring additional manufacturing staff.
  • The product mix within the defense sector is anticipated to shift back to 30% rigid PCBs and 70% rigid flex PCBs.
  • The company expressed gratitude towards its employees, customers, partners, and investors for their ongoing support.

Eltek Limited remains steadfast in its commitment to long-term growth and profitability despite the headwinds faced in the second quarter of 2024. With a strategic focus on the defense sector and investments in capacity and technology, the company is poised to navigate the challenges of the current market environment.

Full transcript - Eltek Ltd (ELTK) Q2 2024:

Operator: Ladies and gentlemen, thank you for standing by. Welcome to the Eltek Limited 2024 Second Quarter Financial Results Conference Call. All participants are present in listen-only mode. Following management's formal presentation, instructions will be given for the question-and-answer session. [Operator Instructions] As a reminder, this conference is being recorded. Before I turn the call over to Mr. Eli Yaffe, Chief Executive Officer; and Ron Freund, Chief Financial Officer, I would like to remind you that they will be referring to forward-looking information in today's presentation and in the Q&A. By its nature, this information contains forecasts, assumptions and expectations about future outcomes, which are subject to risks and uncertainties outlined here and discussed more fully in Eltek's public disclosure filings. These forward-looking statements are projections and reflect the current beliefs and expectations of the company. Actual events or results may differ materially. We'll also be referring to non-GAAP measures. Eltek undertakes no obligation to publicly release revisions to such forward-looking statements to reflect events or circumstances occurring subsequent to this date. I will now turn the call over to Mr. Eli Yaffe, Mr. Yaffe, please go ahead.

Eli Yaffe: Thank you. Good morning. Thank you for joining us for 2024 second quarter earnings call. With me is Ron Freund, our Chief Financial Officer. We will begin by providing you with an overview of our business and summary of the principal factors that affected our results during quarter two, 2024. After our prepared remarks, we will be happy to answer any of your questions. By now, everyone should have access to our press release which was released earlier today. The release will be also available on our website. Today, I would like to address two key areas: revenues and operations. I will start with revenues. Since the beginning of 2023, we have demonstrated consistent growth driven by high demand for our products, timely workforce expansion and ongoing investment in machinery and infrastructure. We actually forecast increased demand and initiate an accelerated investment plan in early 2022, which has already enhanced our capacity and will continue to do so through the end of 2025. However, in this quarter, we experienced a decrease in revenue and profit compared to the previous period. This decline is primarily due to the significant timing shift of some of our key customers who prioritize orders for PCB with medium technology requirements, resulting in lower price and margins. We did not succeed to maintain our profitable mix from the prior period and orders and more complex, higher-margin PCB were pushed to the end of Q2 ‘24 and Q3 2024. Moreover, as mentioned in the previous call, our current bottleneck is manpower. During the second quarter, we continue to face production delays due to the manpower-related capacity constraints. During the quarter, we had 59 working days, compared to 60 to 90 days in Q2 2023, a decrease of 5%. The shortage of manpower and decrease in workdays prevent us from producing and delivering some of the high-margin PCB orders we had on hand for Q2 delivery. This unfavorable mix had negatively impacted our short-term financial performance. We finished Q2 with $10.5 million in revenue, gross profit of $1.6 million and gross margin of 16%. As mentioned earlier, the lower gross margin for the quarter is attributable to the product mix. Manufacturing costs remains consistent with the previous quarter, but the average sales price was lower leading to a decline in gross margin. We remain confident in our long-term strategy and market position. We expect to return to profitability parameters of previous quarters in Q3 and Q4 2024. As product mix strategies are realigned. As of today, our backlog has increased by 30% since the beginning of 2024. This increase highlights our need to increase capacity immediately, primarily by growing our workforce, which we'll discuss later. Increase in backlog is due to the strong defense sector demand related to the current situation in our area and the shift back of manufacturing from the East. These two factors are major influence in our backlog and future revenues. We estimate that we have not yet seen the full impact of the regional conflict and we anticipate further increase in the defense sector demand for our products in the coming quarters. We continue to focus on securing long-term orders rather than short-term orders. We have also decided that in spite of the high defense sector demand, we will continue to allocate enough capacity to meet the demand of our high-end industrial and medical sectors, and we will try to keep the mix of the service segment as before. I will now discuss our accelerated investment plan and our action to deal with the management -- with the manpower issues. We are continuing our accelerated investment plan with a significant focus on three new coating lines. The first quoting line, which called [VFV] (ph) line is already installed and operational. During the quarter, we reviewed the status of our suppliers and confirm that the installation of the remaining two coating lines will be installed by the end of 2025. These new lines will increase our capacity, enable the production of more advanced technological products and improve yields. We are currently in the middle of the transition office space within our building to accommodate the required construction for the remaining two coating lines. By the end of the second quarter, we had issued purchase order to all the components of the plan. The balance of payment forecast through the end of 2025 is approximately $8 million. It's important to note that as mentioned previously, this investment is in addition to our regular capital expenditure, which range from $2 million to $3 million per year. Regarding manpower, we are navigating the challenging market with the strong demand for employees. In response to this demand and our forecast for the increased order flow, we have adjusted our recruitment policy, primarily by increasing direct labor salaries. This action has already had positive effect, and we are now increasing our workforce daily. Our plan is to add about 50 new employees in the coming months and to extend our manufacturing capacity to include an extended sales shift. We expect these measures to help us to meet delivery schedule, accelerate delivery dates and increase revenue. I will now turn the call over to Ron Freund, our CFO, to discuss our financial results.

Ron Freund: Thank you, Eli. I would like to draw your attention to the financial statements for the second quarter of 2024. During this call, I will also discuss certain non-GAAP financial measures. Eltek uses EBITDA as a non-GAAP financial performance measurement. Please see our earnings release for its definition and the reasons for its use. I will now go over the highlights of the second quarter of 2024. All numbers mentioned are in U.S. dollars. Revenues for the second quarter of 2024 were $10.5 million, compared to $11 million in the second quarter of 2023. Gross profit reached $1.6 million, compared to a gross profit of $3 million in the second quarter of 2023. The decrease is due to the decrease in revenue and the unfavorable mix of products sold. Operating profit amounted to $0.4 million in Q2 2024, compared to $1.4 million in Q2 2023. We recorded a financial income of $0.5 million during Q2 2024, including income from the devaluation of the NIS against the U.S. dollar and interest on our interest-bearing bank deposits. Net profit was $0.8 million or $0.11 per share in Q2 2024, compared to net profit of $1.3 million or $0.22 per share in Q2 2023. EBITDA was $0.10 million, compared to $1.7 million in Q2 2023. During the second quarter of 2024, we enjoyed positive cash flow from operating activities of $1.8 million. As of June 30, 2024, we had cash and cash equivalents and short-term bank deposits of $18.3 million with no debt outstanding. We are now ready to answer your questions.

Operator: Thank you. Ladies and gentlemen, at this time, we will begin the question-and-answer session. [Operator Instructions] The first question is from Tom Kerr of Zacks. Please, go ahead.

Tom Kerr: Good morning. Can you explain in more detail the timing shift by these customers that go to medium technology? Is that -- what specific reason would they shift to medium technology PCBs instead of traditional complex PCBs?

Ron Freund: The reason for this unfavorable mix was the timing of production that was required by our customers for lower technology than the regular mix. And that [Indiscernible] said, we produced more than 40% of region instead of the average of 30%. It was time -- it was a requirement by our customers. And usually, we try to support our customers and change the manufacturing plan according to their requirements.

Tom Kerr: Okay. And you indicated it will return to more complex PCBs in the third and fourth quarter. Will that mean the traditional gross margin of 27% will be returning?

Eli Yaffe: Yes. Hi, Tom, it's Eli. Yes, we'll return to the 27% for long-term. And as I mentioned before, some of the high-end PCB were pushed to the end of Q2 and toward Q3 2024.

Tom Kerr: Got it. And I noticed that capital expenditures were $5.9 million for the quarter. Is that all related to the accelerated investment program?

Ron Freund: Most of it.

Tom Kerr: Most of it and what can we expect that in the next...

Ron Freund: Just one correction, the $5.9 million is for the six months, not the quarter. In the quarter, we invested $3 million.

Tom Kerr: Okay. Sorry, I thought that was the other one. Where do you expect that in the second-half of the year in terms of capital expenditures?

Ron Freund: So as we say, it depends mainly on the timing of installation of machines and delivery. We have a balance of about $8 million regarding the accelerated investment plan to be paid during the rest of 2024 and 2025. I estimate that during the next half year, we'll spend some somewhere around $2 million.

Tom Kerr: Okay. So much of that will be in 2025, then...

Ron Freund: Yes.

Tom Kerr: And one more, the -- are you guys still looking for a presence in North America? Any progress on that?

Ron Freund: Yes, we are still looking for a suitable target company. We cannot tell something about it. It hasn't reached a stage we will report something, but we are working with this issue also.

Tom Kerr: Okay. Thank you. I'll jump back in the line. Thank you.

Operator: The next question is from Michael Wu. Please go ahead.

Unidentified Analyst: Hi. First of all, would you mind to disclose the percentage of the revenue mix for the defense sector?

Eli Yaffe: The defense sector is approximately 60% -- was 60% in Q3 -- Q2 2024.

Unidentified Analyst: So it's the same, right, around...

Eli Yaffe: Yes. Yes. It does not change. What was changed is the mix of the product within the defense sector.

Unidentified Analyst: Okay. So I mean, do you expect the Q3, Q4 will be the same similar like revenue mix?

Eli Yaffe: No, the mix is going to change back to 30%-70% as we mentioned, not 40%-60% as it was as it was in Q2, sorry.

Unidentified Analyst: Okay. So we'll go up a little bit, right?

Ron Freund: Yes, it will go up.

Eli Yaffe: It will go up. High-margin PCBs will go up.

Unidentified Analyst: Okay. Great. About the CapEx from -- for the next 1.5 years until the end of 2025, would you expect like the total CapEx would be around $10 million, $12-ish million

Ron Freund: Yes. We expect that it will be around the $10 million.

Unidentified Analyst: Okay, great. Thank you. That’s all my questions. Thanks.

Operator: [Operator Instructions] The next question is from Tom Kerr of Zacks. Please go ahead.

Tom Kerr: Hi, just one follow-up on the manpower issue. I couldn't quite hear the phone line was a little blurry, but did you say you will be hiring 50 people and maybe just explain the manpower issue one more time?

Ron Freund: Right now, the current situation in the manpower labor market in Israel is very tough. So we increased in July 1 to increase salary of direct employees in Eltek. And by doing it, we start to absorb more people to work with us. I'm speaking about direct employees. And the plan is to increase the manpower by 50 people, 5-0.

Eli Yaffe: And we are hoping to do it by the year-end. It's a very tough market, but our steps shown performance. That means that once we raise the salaries of direct labor, we could recruit more employees, and we are recruiting on a daily basis.

Tom Kerr: And are those all primarily manufacturing employees? Or are there other areas?

Eli Yaffe: Manufacturing employees.

Ron Freund: Direct employees and manufacturing employees, yes.

Tom Kerr: Great. Okay, thanks.

Ron Freund: Thank you, Tom.

Tom Kerr: That’s all I had.

Operator: The next question is from Ron Su. Please go ahead.

Unidentified Analyst: Hi, everyone. First question is regarding this potential future deal in North America, how are you going to finance these kind of deals? Do you consider like future offering as you did in the $16 per share offering? Or do you consider financing with bank loan or change of shares? This is the first question. Second question is, do you think that the changes in the mixture of PCB complex products that you can compensate on even the revenue and the profit. So that in the total year, you will reach your -- I don't know if it's target, because you don't publish target, but to compensate even more for the 27% gross margin and for even higher revenue than previous quarters?

Eli Yaffe: Hi, Ron. So in regard to your first question, any financing plans for the purchase will depend, of course, on the scope of acquisition and the form of financing that will be discussed and agreed between the parties. But at this point, our plans are to try and finance the purchase with the cash we have on hand. And by raising debt, we do not intend at this stage to raise additional capital for this purchase.

Ron Freund: Regarding your second question, Ron, regarding the mix of product in Q2, as I said in our PR, the mix of the quarter contained mortgage requirement that results lower prices and margins, but the average -- normal average is 30% rigid PCB and 70% rigid flex with high margins. But this quarter, in quarter two, the mix was contained 42%, more precisely, 42% of rigid PCB with low margin and 58% high-end PCB with high margin. And we agreed to receive and produce this order since we have long-term relationships with our key customers. And when there is a demand for change priorities, we support our customers and change our manufacturing plan accordingly. And that's the reason that we know that it was an event, because of the situation in the defense sector in Israel, and we support them. But for long-term, we still focused 27% gross margin.

Eli Yaffe: And as for the balance of the year, we don't give guidelines, as you probably know. We believe that we will make better than this quarter. And at this point, I will stop.

Unidentified Analyst: Okay, thank you.

Ron Freund: Thank you.

Operator: There are no further questions at this time. Before I ask Mr. Yaffe to go ahead with his closing statement, I would like to remind the participants that a replay of this call will be available tomorrow on the website. Would you like to make a concluding statement?

Eli Yaffe: Before we conclude, I want to express my gratitude to our employees and their unwavering dedication and executing our strategy. I also extend my thanks to our customers, partners and investors for their ongoing support. Thank you all for joining today's call. Have a great day.

Operator: Thank you. This concludes the Eltek Limited 2024 second quarter financial results conference call. Thank you for your participation. You may now go ahead and disconnect.

This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.

Latest comments

Risk Disclosure: Trading in financial instruments and/or cryptocurrencies involves high risks including the risk of losing some, or all, of your investment amount, and may not be suitable for all investors. Prices of cryptocurrencies are extremely volatile and may be affected by external factors such as financial, regulatory or political events. Trading on margin increases the financial risks.
Before deciding to trade in financial instrument or cryptocurrencies you should be fully informed of the risks and costs associated with trading the financial markets, carefully consider your investment objectives, level of experience, and risk appetite, and seek professional advice where needed.
Fusion Media would like to remind you that the data contained in this website is not necessarily real-time nor accurate. The data and prices on the website are not necessarily provided by any market or exchange, but may be provided by market makers, and so prices may not be accurate and may differ from the actual price at any given market, meaning prices are indicative and not appropriate for trading purposes. Fusion Media and any provider of the data contained in this website will not accept liability for any loss or damage as a result of your trading, or your reliance on the information contained within this website.
It is prohibited to use, store, reproduce, display, modify, transmit or distribute the data contained in this website without the explicit prior written permission of Fusion Media and/or the data provider. All intellectual property rights are reserved by the providers and/or the exchange providing the data contained in this website.
Fusion Media may be compensated by the advertisers that appear on the website, based on your interaction with the advertisements or advertisers
© 2007-2024 - Fusion Media Limited. All Rights Reserved.