Earnings call transcript: Axcelis Q2 2025 earnings beat expectations, stock surges

Axcelis Technologies reported a strong financial performance for the second quarter of 2025, significantly exceeding market expectations. The company posted earnings per share (EPS) of $1.13, surpassing the forecasted $0.71. Revenue also exceeded projections, reaching $195 million against an expected $185.94 million. Following the earnings announcement, Axcelis shares surged by 12.87% in pre-market trading, reflecting investor optimism. According to InvestingPro analysis, the company maintains a "GREAT" financial health score of 3.07 out of 4, supported by strong profitability and cash flow metrics.

Key Takeaways

• Axcelis reported EPS of $1.13, a 59.15% surprise over forecasts.
• Revenue reached $195 million, beating expectations by 4.63%.
• The company’s stock rose 12.87% in pre-market trading.
• Key growth areas include high energy ion implantation and silicon carbide technology.
• Axcelis expects modest revenue improvement in 2025.

Company Performance

Axcelis Technologies demonstrated robust performance in Q2 2025, driven by its strategic focus on high energy ion implantation technology and strong positioning in the silicon carbide market. The company has continued to capitalize on growth opportunities in power devices and electric vehicle applications. Despite a challenging memory market, Axcelis has maintained a competitive edge through disciplined cost control and strategic investments in research and development.

Financial Highlights

• Revenue: $195 million, exceeding expectations.
• Earnings per share: $1.13, compared to a forecast of $0.71.
• Gross margins: 45.2% (non-GAAP).
• Free cash flow: $38 million.
• Cash and securities: $581 million.
• Share repurchases: $45 million in Q2.

Earnings vs. Forecast

Axcelis reported an EPS of $1.13, significantly above the forecast of $0.71, resulting in a 59.15% surprise. Revenue also surpassed expectations, reaching $195 million compared to the forecasted $185.94 million. This performance marks a substantial improvement over previous quarters, highlighting the company’s successful execution of its strategic initiatives.

Market Reaction

Following the earnings announcement, Axcelis’s stock price increased by 12.87% in pre-market trading, reaching $80. This surge reflects investor confidence in the company’s strong quarterly performance and positive outlook. The stock’s movement contrasts with broader market trends, highlighting Axcelis’s robust positioning in the semiconductor sector. InvestingPro analysis indicates the stock is currently undervalued, trading at a P/E ratio of 14.2x and an EV/EBITDA multiple of 10.2x. Subscribers can access 10+ additional ProTips and comprehensive valuation metrics through the Pro Research Report.

Outlook & Guidance

Looking ahead, Axcelis projects Q3 2025 revenue of approximately $200 million and a non-GAAP EPS of around $1.00. While InvestingPro data shows analysts anticipating a sales decline in the current year, the company remains optimistic about a potential recovery in the memory market by 2026. Four analysts have recently revised their earnings estimates upward for the upcoming period, suggesting growing confidence in the company’s prospects. Axcelis remains committed to advancing its technology roadmaps and exploring new growth opportunities.

Executive Commentary

CEO Russell Lowe stated, "We believe we are well positioned to navigate the current cyclical downturn." He emphasized the importance of disciplined cost controls, noting, "Our disciplined focus on cost controls is delivering tangible benefits, even in a lower volume environment." Lowe also highlighted the company’s strong positioning in the silicon carbide market, saying, "We are seeing a bit more of a bifurcation in the silicon carbide market."

Risks and Challenges

• Supply chain disruptions could impact production and delivery timelines.
• Market saturation in mature segments may limit growth opportunities.
• Macroeconomic pressures, such as inflation and interest rate changes, could affect consumer spending and investment.
• Competitive dynamics in China pose ongoing challenges.
• Potential tariff changes and regulatory shifts may impact international operations.

Q&A

During the earnings call, analysts inquired about technology transitions in the silicon carbide market and geographic differences in technology adoption. Axcelis addressed concerns about the competitive landscape and clarified its strategies for managing tariffs and supply chain challenges.

Full transcript - Axcelis Technologies Inc (ACLS) Q2 2025:

Sean Altmer, Conference Coordinator: Good day, ladies and gentlemen, and welcome to the Axcelis Technologies call to discuss the company’s results for the second quarter twenty twenty five. My name is Sean Altmer, and I will be your coordinator for today. At this time, all participants are in listen only mode. After the speakers’ presentation, there will be a question and answer session. To ask a question during the session, you will need to press 11 on your telephone.

You will then hear an automated message advising your hand is raised. To withdraw your question, please press 11 again. Please be advised that today’s conference is being recorded. I would now like to turn the presentation over to your host for today’s call, David Grzic, Senior Vice President of Investor Relations and Corporate Strategy. Please proceed.

David Ryzhik, Senior Vice President of Investor Relations and Corporate Strategy, Axcelis Technologies: Thank you, operator. This is David Ryzhik, Senior Vice President of Investor Relations and Corporate Strategy, and with me today is Russell Lowe, President and CEO and Jamie Coogan, Executive Vice President and CFO. If you have not seen a copy of our press release issued earlier today, it is available on our website. In addition, we have prepared slides accompanying today’s call, and you can find those on our website as well. Playback service will also be available on our website as described in our press release.

Please note that comments made today about our expectations for future revenues, profits and other results are forward looking statements under the SEC’s Safe Harbor provision. These forward looking statements are based on management’s current expectations and are subject to the risks inherent in our business. These risks are described in detail in our Form 10 ks annual report and other SEC filings, which we urge you to review. Our actual results may differ materially from our current expectations. We do not assume any obligation to update these forward looking statements.

During this call, we will be discussing various non GAAP financial measures. Please refer to our press release and accompanying materials for information regarding our non GAAP financial results and a reconciliation to our GAAP measures. Now I’ll turn the call over to President and CEO, Russell Lowe.

Russell Lowe, President and CEO, Axcelis Technologies: Good morning, and thank you for joining us for our second quarter twenty twenty five earnings call. Beginning on Slide four, we delivered solid results in the second quarter with revenue of $195,000,000 and non GAAP earnings per diluted share of $1.13 both exceeding our outlook. We generated slightly better than expected systems and CS and I revenue delivered strong gross margins while maintaining disciplined cost control. Bookings in the second quarter were $96,000,000 down slightly on a sequential basis and reflecting a book to bill of 0.8 times. While customers continue to digest capacity, we’re encouraged that first half bookings reflect a slight improvement compared to the 2024.

Consistent with our prior commentary, bookings can fluctuate from quarter to quarter. With that, let me add some additional color on the trends we are seeing by market category. Turning to slide five. In the quarter, sales to mature node applications comprised almost the entirety of our system shipments, in particular, power and general mature. Now, on slide six, let me review our trends by end market.

Within our power business, shipments of silicon carbide applications were relatively flat on a quarter over quarter basis. While the overall silicon carbide industry continues to digest the capacity that’s been put in place over the past two years, we see pockets of investment across a number of different customers. In China, we see continued firm demand for both a 150 millimeter and 200 millimeter applications. Customers are investing to meet growing demand for silicon carbide in the fast growing China EV industry, as well as other applications. Outside of China, customers are using this slower period to increase R and D engagement and invest in technology transitions.

In the quarter, we shipped a pure XE high energy tool to a customer that is investing in 200 millimeter superjunction technology. And we continue to be in active discussions and engagements with other customers on their trench and superjunction technology roadmaps. As we’ve noted in the past, Exelis is the market and technology leader in high energy ion implantation, which is required for deeper and more precise implants and a critical enabling technology for customers transitioning to these next generation architectures. In addition to the need for high energy implants, we’re excited about the long term demand drivers for silicon carbide, which is underpinned by declining device prices along with the world’s need for greater energy efficiency. This creates the following tailwinds for silicon carbide demand.

First, in the EV industry, we anticipate the penetration rate into EVs to continue to grow. And this includes not just battery electric vehicles, but hybrid vehicles as well, where we are already seeing signs of adoption. Second, we anticipate the silicon carbide content per vehicle to grow as well. Third, we see growing requirements for higher voltage silicon carbide applications, such as faster charge times, driving investment and development of trench and superjunction designs. And as I noted, we are a technology enabler with our market leading high energy portfolio.

Fourth, while overall demand for EVs in The US has decelerated on a global basis, EV sales continue to grow at a robust pace with IEA forecasting 25% year over year growth in 2025. As a result of the penetration rate of EVs, the percentage of overall auto sales continue to grow, the combination of all these factors creates a multiplier effect on silicon carbide demand. And that’s just within the EV industry. Finally, with device prices declining, we also expect growing adoption outside of the auto industry, including renewable energy, industrial motor drives, railway applications, data center power supplies, and many others. In fact, one important proof point of this is the recent public announcements from leading power device makers over the past several months, which signals increased attention and collaboration on delivering higher voltage power solutions for next generation AI data centers.

We believe silicon carbide will play a key role here. We also believe the combination of these volume, content, and technology drivers translates into attractive long term market opportunity for Exelis. From a near term perspective, as we think about this business over the next few quarters, we see continued pockets of demand. And we expect a modest improvement in revenue in the 2025. Starting with the second quarter results, we will now refer to the remainder of the power market segment as other power compared to previously referring to this as silicon IGBT.

While IGBTs have made up a lion’s share of this category, we believe other power is more reflective of other potential power applications such as silicon VCDs, silicon power MOSFETs, and GaN power devices. Turning to the results in the second quarter, Ship System revenue from our other power applications grew sequentially, primarily due to growth in China across multiple customers. In our General Mature segment, revenue declined slightly on a sequential basis as customers continue to manage their capacity investments given the current demand environment, auto, industrial, and consumer electronics. We continue to see pockets of improved tool utilization, which is an encouraging sign. However, we would need to see this continued coupled with improved end demand in order for this to translate into resumption of capacity investments.

Market dynamics aside, we are working closely with customers on their capacity and technology roadmaps. Case in point, we secured a meaningful order for high energy and high current tools from a customer in China that is investing in 28 nanometer applications. This is a nice reference win for us and can open up additional opportunities down the road. Turning to slide seven, in advanced logic, we continue to engage closer with customers on their evaluation units. And we are pleased to say that in the second quarter, received a forward order from one of these customers.

This is consistent with our strategy of penetrating this opportunity by working collaboratively with customers through their evaluation units during their R and D process. Advanced Logic remains an underpenetrated market for Exelis, We are actively targeting next generation implant applications at the n plus one, n plus two, and n plus three nodes. This includes important applications for implant, such as the backside power distribution network integration, where we believe we have potential solutions based on improved device performance in yield and the ability for customers to control the energy purity of implanted ions. Moving to memory, ship system revenue declined on a sequential basis, consistent with commentary on our prior call that memory spending would remain muted for the balance of the year. Compared to 2024, we saw a sharp reduction in volume.

We continue to expect modest growth in this end market on a year over year basis. Despite the pause on implant investments across DRAM and NAND, we’re executing on our strategy of penetrating new and existing opportunities with customers on their next generation roadmaps and fab plans. To that end, we secured an order for a high current system for DRAM application with the potential for additional follow on orders based on this customer’s investment plans. In NAND, customers remain focused on scaling to higher layer counts, which requires deposition and etch chamber based upgrades and not incremental ion implantation capacity. As a result, we expect demand for NAND applications to remain muted over the balance of the year.

On slide eight, let me wrap up my thoughts prior to handing the call over to Jamie. Despite the macroeconomic uncertainty and widely known cyclical digestion we’re seeing in 2025, we’re executing very well with what we can control. This includes the following. First, a relentless focus on innovation, deep engagement with current and new customers across their technology road maps. In fact, during these quieter times, customers increase their focus on r and d to drive better cost performance and yield.

And simply put, we see ourselves as an extension of the r and d teams. Second, our engagement with customers does not end at the system level, but also CSNI, our customer solutions and innovations business is foundational to the customer experience. This includes spares and consumables service upgrades and used tools. Through the 2025, our CSI revenue made up approximately 30% of total revenue and is up slightly on a year over year basis, despite lower systems volumes during this period. And this is a reflection of the strength of our installed base, which provides a resilient revenue stream through the cycles.

Moreover, given that our CS and I gross margins are materially higher than the corporate average, this business makes up a meaningful percentage of our profitability, And I’m pleased with our execution in driving more service contracts and high value upgrades for customers that are seeking our latest generation technology within their existing footprint. And third, we are prudently managing our cost structure, while ensuring we have the resources necessary to invest in growth. This is reflecting our first half twenty twenty five adjusted EBITDA margin of approximately 20%. Taken together, these actions are allowing us to deliver strong profitability despite a sickly soft demand environment, while positioning us to catch the long term growth opportunities that we believe lie ahead. With that, let me turn the call over to Jamie for a closer look at our results and outlook.

Jamie?

Jamie Coogan, Executive Vice President and CFO, Axcelis Technologies: Thank you, Russell, and good morning, everyone. I’ll start with some additional details on our second quarter before turning to our outlook for Q3. Starting on slide nine, second quarter revenue was $195,000,000 with system revenue at $134,000,000 and CS and I revenue at $61,000,000 both slightly above our expectations for the quarter. From a geographic perspective, consistent with our commentary on our prior earnings call, China increased sequentially to 65% of total shipped system sales, up from 37 in the prior quarter. We continue to anticipate our customers in China to digest the robust investments they’ve made into mature node capacity over the past few years.

As a result, we anticipate second half revenue in China to be relatively similar to the first half. Turning to other regions, we saw shift system sales to The U. S. At 19%, while Korea declined to 8%, consistent with our expectation of muted demand from memory for the balance of the year following the first quarter. In addition, we’ve added the geographic split on total revenue, reflecting both systems and CS and I.

Using this measure, revenue from China totaled 55%, U. S. Was 18%, and Korea was 13%. Starting in the third quarter, we will transition to reporting geographic split of total revenue only, which is consistent with our peers and a better reflection of the overall company exposure we have. Please see the appendix of our earnings slide presentation for a quarterly breakdown of geographic revenue mix starting in the 2024.

As Russell mentioned, bookings declined slightly on a sequential basis to $96,000,000 and we exited the second quarter with backlog of $582,000,000 Turning to slide 10. Now let me share some additional details on our GAAP and non GAAP results. We delivered strong GAAP gross margins of 44.9% in the quarter, exceeding our outlook of 41.7%. Our non GAAP gross margins were 45.2% compared to our outlook of 42%. Our better than expected margins were primarily due to higher CS and I revenue, another quarter of better than expected warranty and installation costs and favorable systems mix.

In addition, our gross margins are benefiting from the cost savings and efficiencies actions we’ve taken over the past years, and we will continue to explore ways to optimize our cost structure. GAAP operating expenses totaled $58,400,000 and on a non GAAP basis, operating expenses were $53,600,000 relatively in line with our outlook of $54,000,000 As a result, GAAP operating profit was $29,000,000 reflecting a 14.9% operating margin. Our non GAAP operating margin was 17.7%, leading to an adjusted EBITDA in the second quarter of $38,900,000 reflecting a 20% margin. We generated approximately $6,000,000 in other income with the sequential increase primarily due to foreign currency gains. Our tax rate was approximately 10% in the second quarter on a GAAP basis and approximately 11% on a non GAAP basis.

The lower than expected tax rate was primarily attributable to our foreign derived intangible income deduction and federal research and development credits. For the balance of the year, we estimate our non GAAP tax rate to be approximately 15%. Our weighted average diluted share count in the quarter was 31,900,000.0 shares, and this all translates into GAAP diluted earnings per share of $0.98 which exceeded our outlook of $0.57 Non GAAP diluted earnings per share was $1.13 exceeding our outlook of $0.73 The higher than expected EPS was primarily due to the better than expected revenue gross margin. And in addition, our non GAAP EPS benefited by about $05 due to a better than expected tax rate. Moving to our cash flow and balance sheet data shown on Slide 11, we generated $38,000,000 of free cash flow in the second quarter as a result of better than expected profitability as well as improved days sales outstanding.

Turning to share repurchases. In the second quarter, we repurchased approximately $45,000,000 in shares. And at the end of the second quarter, we had $168,000,000 remaining in share repurchase authorization. We exited the quarter with a strong balance sheet consisting of $581,000,000 of cash, cash equivalents and marketable securities on hand, which includes $31,000,000 of long term securities that we’ve added in the second quarter. Before I turn to our outlook for the third quarter, I’ll share some of our current thoughts on tariffs.

We continue to monitor the fluid tariff environment, and we believe we are well positioned to respond to any changes through risk mitigation strategies and by leveraging our global supply chain and manufacturing footprint. The outlook I will provide today includes a modest estimated impact from tariffs. With that, let me discuss our third quarter outlook on Slide 12. All measures will be non GAAP with the exception of revenue. We expect revenue in the third quarter of approximately $200,000,000 Additionally, our initial view of fourth quarter points to relatively similar levels compared to the third quarter.

We expect non GAAP gross margins of approximately 43%. The sequential decline is primarily due to our mix of systems revenue for the period as well as a slightly higher volume of systems revenue relative to CS and I. Our current view of the fourth quarter gross margins also points to similar levels with the third quarter. We expect non GAAP operating expenses of approximately $53,000,000 in the third quarter and expect this to increase slightly on a sequential basis in the fourth quarter. Adjusted EBITDA in the third quarter is expected to be approximately $39,000,000 And finally, we estimate non GAAP diluted earnings per share in the third quarter of approximately $1 In summary, and to echo Russell’s earlier commentary, despite the cyclical softness in our markets, we are pleased with our ability to generate robust profitability, return capital to shareholders and maintain a strong balance sheet, which positions us to deliver long term value creation for our shareholders.

With that, let me hand the call back to Russell for closing remarks. Russell?

Russell Lowe, President and CEO, Axcelis Technologies: Thank you, Jamie. We believe we are well positioned to navigate the current cyclical downturn. Our disciplined focus on cost controls is delivering tangible benefits, even in a lower volume environment. At the same time, our strong balance sheet has enabled us to opportunistically repurchase shares and return cash to our shareholders. As we look ahead, we are confident we will emerge from this turn even stronger, supported by a clear technology roadmap and differentiated market position.

I want to thank our customers, employees, shareholders, and partners for their continued support and trust in Axcelis. With that operator, we’re ready to take your questions.

Sean Altmer, Conference Coordinator: Thank you. At this time, we will conduct a question and answer session. As a reminder, to ask a question, you’ll need to press 11 on your telephone and wait for your name to be announced. To withdraw your question, please press 11 again. Please limit yourself to one question and one follow-up.

Please stand by as we compile the Q and A roster. And our first question comes from Christian Schwab with Craig Hallum Capital. Your line is now open.

Christian Schwab, Analyst, Craig Hallum Capital: Thanks for taking my questions. Congrats on the great quarter and the great results. As much of the memory market in 2026, do you have any initial indications of wafer start growth there yet?

Russell Lowe, President and CEO, Axcelis Technologies: Hey, Christian. It’s Russell. So if we kind of really we’re not forecasting 2026 yet, but I think what we’ve said is that, you know, let’s just take DRAM initially. So obviously, HBM has been quite hot. That’s been eating away at DRAM capacity, and a lot of the suppliers have been kind of four wall constrained.

So, you know, as as as you know, node over node, the implant intensity doesn’t change much. So we would need wafer starts to increase in order to start shipping more implanters. And I think while it may take a couple of years for new capacity to come on, I think in the ’25, early twenty six, you’re going to start to see some of these new capacity come online. So obviously, we’re not going to be making any predictions yet, but we’re excited by that.

Christian Schwab, Analyst, Craig Hallum Capital: Great. And then my second question has to do with the, general mature, marketplace, kind of, information, by the chip manufacturers is kind of scattered as far as outlook and optimism in auto and industrial. But from your perspective, do you see that market improving in the ’5? Or do you think that’s really a calendar 2026 event?

Russell Lowe, President and CEO, Axcelis Technologies: Yeah. So I think so we’re kind of saying that we believe that our revenue for the ’25 is going be slightly up on that revenue for the 2025, but it won’t be due to general mature. I think we kind of we’ve said that we actually seeing slight uptick and it’s because of power. General mature is I think it’s in a digestion period at this stage.

Christian Schwab, Analyst, Craig Hallum Capital: Great. No other questions and congrats on the great results. Thank you.

Jamie Coogan, Executive Vice President and CFO, Axcelis Technologies: Thanks, And

Sean Altmer, Conference Coordinator: our next question comes from Craig Ellis with B. Riley Securities.

Craig Ellis, Analyst, B. Riley Securities: Yes. Thanks for taking the question. And guys, congratulations on very strong execution through the income statement and the strong guide. I wanted to follow-up to start, Russell, with further inquiry into one of the points you made around silicon carbide customers using the current period for R and D technology transition. So the question is this, to me, that sounds like customers are acquiring tools for use in R and D lines versus in volume production, which would imply that when they’re ready for volume production, there might be a further inflection in demand.

Is that the right interpretation and implication from what you were saying there?

Russell Lowe, President and CEO, Axcelis Technologies: Hey, Craig. So so actually, so just to kinda like, you know, recap. We’re seeing we we think the silicon carbide is slightly stronger in the ’25 than the in the first half. What we’re beginning to see is a bit more of a bifurcation. Within China, obviously, they’re looking to get the processes laid down, get the yield up, get the cost down, and they’re focusing a lot on six inch planer.

Some are looking at 200 millimeter planer. Outside of China, you’re seeing customers drive very quickly to 200 and particularly to advanced devices as well. So they’re looking to go from planar to trench, and then we’ve also got customers working on superjunction as well. So you’ve seen this bifurcation in technology, and those buys have been specifically, you know, focused on these new technologies. So as as we’ve mentioned before, to make trench and superjunction devices, you need high energy implanters.

And as the market leader for high energy, this is playing beautifully to our sweet spot. And we’re working very close to that customers to develop their processes utilizing these tools.

Craig Ellis, Analyst, B. Riley Securities: Great. Really helpful. And then, Jamie, a follow-up on your comments around gross margin and drivers to the robust levels in the quarter. So, I think you mentioned CS and I mix, warranty performance mix and trailing multiyear cost reduction. The question is this, can you talk a little bit more about where you see structural gains in some of those COGS drivers, whether it’s warranty or just the ability to perpetuate ongoing cost gains.

Because as systems eventually comes back, we’ll lose at least one of the favorable drivers. And I want to better understand how some of the others could help perpetuate the strong performance. Thank you.

Jamie Coogan, Executive Vice President and CFO, Axcelis Technologies: Yeah. Thanks, Craig. Good question on the margins. Yeah, so mix is, as you noted, systems mix, so mix within our systems and then mix between systems and CS and I will continue to be the primary driver of gross margin, you know, for us over the reporting peer, over the sort of performance period. The structural changes that we’re making are in sort of what call like, these we call them below standard cost type items that’s in our warranty installation and sort of other expenses related to that as well as, to some extent, the maximization of our global operations footprint, which we talked about, which will provide some incremental benefits over time.

When we talk about our long term margin trajectory and projections, the cost, we’re going to continue to drive cost out to the best of our ability. That is a multi year path for us to see that sort of change in a much more meaningful and structural way. But what we’ve done here in 2024, and now you’re seeing to some extent through 2025, is that on the lower volumes, we have been able to drive sort of higher margins here in a pretty nice and meaningful way. Looking to the back half of the year, we do see margins come down slightly relative to the expectations, and that really is driven by mix. So we still have those favorable benefits that we’re seeing below the line, but the mix is really going to put a little bit of pressure on margins here in the back half of ’25.

Craig Ellis, Analyst, B. Riley Securities: Really helpful, Jamie. Thanks, guys. Yes.

Russell Lowe, President and CEO, Axcelis Technologies: Thanks, Rick.

Sean Altmer, Conference Coordinator: And our next question comes from Jed Dorsheimer with William Blair.

Jed Dorsheimer, Analyst, William Blair: Hi, thanks for taking my question. And I’ll echo the sentiments. Russell, I’m just I was wondering if I could go back to a previous question and just get a little bit more detail. I think it’s helpful to understand sort of the Western shift to more advanced structures such as trench where the capital intensity for high energy is greater. I just the question is, as you discuss the difference between China and rest of the world, are you implying that because high energy is used in planar and trench.

Is the mix that you’re selling into China actually high current and medium current skewed? Or is it high energy, but just for planar versus high energy for the more capital intensive trench and rest of the world? And then I have a follow-up.

Russell Lowe, President and CEO, Axcelis Technologies: Right. So do standard planar, you don’t actually need high energy. So that would be the high current and the medium current, and those would be the tool sets you’d need. As you start to go into higher energy, you’re gonna need you know, I’m saying like, when you go into like trench and super junctions, That’s when you need to start using high energy. And the intensity of high energy goes up, obviously, because you can’t diffuse these implant profiles in the silicon carbides.

You have to overlay them with channeling. I’m sorry, with chaining. And also, we’re seeing the energy is going higher and higher as well. So it’s utilizing more and more of our high energy capability. So, you know, if you’re gonna do trench and and superjunction, you’re gonna be using, you know, medium current and high energy and probably a little smattering of high cut of sorry, high current, medium current and high energy.

But if you’re doing planar, you don’t need the high energy.

Jed Dorsheimer, Analyst, William Blair: I appreciate you. Yeah, that helps a lot. As my follow-up and maybe somewhat related, clearly your position in high energy with the linear particle accelerator is a clear differentiation versus your competitor. I’m curious on the R and D front away from just traditional power and silicon carbide. Are you seeing any applications that are demanding high energy in a similar way that silicon carbide has?

I’m just curious as you look out on the horizon in terms of markets, what you’re seeing? Thanks.

Russell Lowe, President and CEO, Axcelis Technologies: So high energy is used in pretty much every application, right, other than advanced logic. So in NAND and DRAM, particularly image sensors, they they are particularly deep devices because of the IQE. So you you have lots of implants into to those. We’re also seeing some kind of more advanced kind of avalanche devices being utilizing really high energy. But I’d say that silicon carbide is definitely a driver at the moment, high energy and I wanna say high energy.

We got we got various flavors of high energy all the way up to, 15 m mega electron volts. So we we we certainly cover the entire gamut. But, yeah, the density of high energy implants in silicon carbide is certainly a driver.

Jed Dorsheimer, Analyst, William Blair: Great. Thank you. I’ll jump back in queue.

Christian Schwab, Analyst, Craig Hallum Capital: Great. Thanks, Chad.

Sean Altmer, Conference Coordinator: Our next question comes from Jack Egan with Charter Equity Research.

Jack Egan, Analyst, Charter Equity Research: Great. Thanks for taking the questions. So I was curious if tariff pull ins or anything of the like might be contributing to some of the positive momentum in CS and I because last quarter, you mentioned that spare parts saw some upside. Logically, depending on the sector or the end market, if these customers had underutilized capacity, then I would imagine to get ahead of tariffs, they might purchase some spares rather than new systems. So I guess maybe just more broadly, what were some of the drivers behind the strong performance in CS and I?

Jamie Coogan, Executive Vice President and CFO, Axcelis Technologies: Yeah, know it’s good question, Jack. And obviously Q2 coming into Q2 is a wild time, right, with the announcement of the tariffs, the regimes and all the sort of uncertainty that created. I would say nothing material driven by what we saw from a pull in perspective. Really, the driver for us in the second quarter for our CS and I had to do with upgrades and upgrade related activity. We’ve talked about this on our roadmap to sort of new capacity additions is you’re going to see increased utilization.

You’re going to see our customers finding ways to squeak out incremental efficiencies out of their current tool sets. That leads to higher upgrade activity, higher spares, consumables and others. And then, they’ll go through and make those capacity additions over time. So, the trend is following sort of the playbook that we’ve seen in the past. But as Russell noted in the commentary, we have not seen the inflection point yet.

That’s going to translate that into necessarily increased bookings just yet. We still think we’re sort of bouncing along the bottom. But the fact that upgrades came in a little bit stronger in Q2 helped both our CS and I margin and the overall margin for the period.

Russell Lowe, President and CEO, Axcelis Technologies: And Jay, just to kind of like piggyback on the back of that. So we have been investing It’s a great opportunity because one, we have a large installed base of legacy tools, but we also have a large installed base of our Purion platform as well. So this is a relatively captive market. And, you know, we’ve we’ve made a point of managing customers, you know, product life cycles.

So this has been a really good business for us.

Jack Egan, Analyst, Charter Equity Research: Great. Okay. That’s helpful. And then I guess it was good to see the elevated repurchases in the quarter. Should we expect kind of a higher baseline going forward?

Or was this more just Exelis being a bit more opportunistic?

Jamie Coogan, Executive Vice President and CFO, Axcelis Technologies: Yes. We certainly talked about our sort of cap allocation strategy, right, being sort of organic growth base, right, our high R and D investments and others, and then sort of pivoting over to the return side as well as looking at inorganic. So, again, during the second quarter, we were opportunistic here allocating the 45,000,000 plus share repurchases in the period. As we go forward, our comment at the time we announced our incremental authorization in the second quarter was around buying at a higher rate than we had historically. And so you may recall, if you go back into some of our filings, you’ll see we typically bought around $15,000,000 or so a quarter.

So we do anticipate buying at an elevated rate relative to that 15,000,000 But I’m not going to forecast exactly how much we’ll put towards share repurchases for the third quarter just yet.

Jack Egan, Analyst, Charter Equity Research: Got it. Okay, thanks. That’s helpful.

Russell Lowe, President and CEO, Axcelis Technologies: Our

Sean Altmer, Conference Coordinator: next question comes from Tom Diffely with D. A. Davidson and Company.

Tom Diffely, Analyst, D.A. Davidson and Company: Yes. Good morning. Thank you for the questions. Russell, first, was hoping to get an update on just the state of the competition in China and maybe both on a systems and a spares business point of view.

Russell Lowe, President and CEO, Axcelis Technologies: Hey, Tom. Yeah. Sure. So, obviously, we we monitor our competition incredibly carefully, you know, particularly a lot of the the new companies that are starting up in China. As I as I mentioned, there’s there’s been competition in China for many years.

There’s, like, two competitors out there. Been there for about twenty years. And what wanted to say is that they are we don’t see them outside of China. We don’t see them in accounts that are, you know, available to US manufacturers, if you like. I think they’re getting their foothold in these accounts that are essentially off limits to US manufacturers.

The feedback we get is that they’re still very immature. Remember, these tools have really big simultaneous compliance requirements. So you need really high throughput. You need really good beam uniformity, beam angles, beam purity, low particles. It really does take a huge amount of knowledge, experience, and work in order to come down, you know, that that that get that maturity curve where you need it to be.

So we certainly watch them very carefully. I would say they’re still very early on in their roadmap.

Tom Diffely, Analyst, D.A. Davidson and Company: Okay. No, that’s very helpful. And maybe as a follow-up, Jamie, maybe talk a little bit about the backlog. At this point, is it just systems or does it include systems plus CS and I? And what do you think the projected shipment or timing is of that backlog?

Jamie Coogan, Executive Vice President and CFO, Axcelis Technologies: Yeah, so that’s a great question, Tom. Yeah, our backlog numbers we report are just systems related orders, so it does not include any of our CS and I revenue expectations in there. So it’s just systems purchase orders that we’ve brought in into the business. As it relates to the timing, that backlog carries into 2026 for sure. And as we think about it, it gives us a nice runway right as we go into 2026.

But we are looking to see that inflection point where we get increased bookings. I think of note, it’s important for us to remember that we are at despite the bookings, necessarily maybe being where we want them to be. They are at a substantially higher levels than they were in the back 2024. And so, we are starting to see some movement there. And ultimately, we just want to make sure that we position the business to be able to execute very well on the upturn, right?

So investing in the R and D, maintaining slightly higher inventory levels to be opportunistic with when that upswing occurs that we’ve got the inventory related to our high turn systems available for our customers. And so, again, we’re proud of the execution so far through the first six months here of 2025, and we look to finish the year out good.

Tom Diffely, Analyst, D.A. Davidson and Company: Great. And I appreciate the color both of you. Thanks.

David Ryzhik, Senior Vice President of Investor Relations and Corporate Strategy, Axcelis Technologies: Thanks, Tom. Thanks, Tom.

Sean Altmer, Conference Coordinator: Our next question comes from Mark Miller with The Benchmark Company.

Mark Miller, Analyst, The Benchmark Company: Good morning and thank you for the question. I’m just trying to reconcile a couple of things here that China EV sales, as you noted, have been strong year over year. Yet you’re projecting flat China sales in the second half. Similarly, DRAM sales have also been strong, but your memory sales were just 3% of total shipments and were sequentially down. I’m just trying to reconcile both of these things with what you’re seeing.

Jamie Coogan, Executive Vice President and CFO, Axcelis Technologies: Yeah, so I think on the China side, what you’re seeing is, again, they built out significant capacity through ’twenty four, and it’s coming into the year. We knew that they would use ’twenty five in order to increase productivity and efficiency of their tools and systems while continuing to add capacity, but at a slightly lower rate. So although we see power continue to be strong,

Russell Lowe, President and CEO, Axcelis Technologies: we see

Jamie Coogan, Executive Vice President and CFO, Axcelis Technologies: China continuing to perform for us, our customers are absolutely trying to find ways to increase the penetration of silicon carbide into the EVs. The penetration rate of silicon carbide into EV in China is still relatively low, given the volume of automobiles they’re selling. In addition to that, Mark, we’re seeing some Chinese auto manufacturers push silicon carbide into hybrid vehicles as well. So I would say the market for silicon carbide in the electric vehicle hybrid vehicle market is increasing. And as a result, our customers are trying to find ways to make sure that their devices are qualified to support that in future periods.

So I think that’s the dynamic we’re seeing there. On the memory side, we knew memory was coming into the year. We had the deliveries there in the first quarter, which was a nice uptick. We still expect memory to be muted through 2025 as our customers are digesting the capacity. As Russell noted a couple of times here, they’re finding opportunities with the growth of HBM to sort of repurpose other parts of the fab to sweep tools in here or there to eke out incremental capacity, but they haven’t necessarily pulled the trigger on significant capacity additions just yet.

And so what we’re really seeing is opportunistic buys by our customers to get that, you know, one or two, three more implanters in there. And memory will ebb and flow over the course of this year. It should be higher than what we saw in 2024, but it’s still going be at muted levels relative to our historical experience.

Russell Lowe, President and CEO, Axcelis Technologies: Thank you.

Sean Altmer, Conference Coordinator: And this concludes the question and answer session. I would now like to turn it back to David Ryszak for closing remarks.

David Ryzhik, Senior Vice President of Investor Relations and Corporate Strategy, Axcelis Technologies: Thank you, operator. I want to thank everyone for joining the call and your interest in Axcelis. Operator, you can close the call.

Sean Altmer, Conference Coordinator: This concludes the presentation. Thank you for your participation in today’s conference. You may now disconnect. Good day.

This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.