Earnings call transcript: Gates Industrial Q1 2025 beats EPS expectations

Gates Industrial Corporation reported a stronger-than-expected performance in the first quarter of 2025, with earnings per share (EPS) reaching $0.36, surpassing analyst forecasts of $0.33. Revenue also exceeded expectations, coming in at $848 million against a forecast of $822.93 million. The company’s stock rose by 3.14% in pre-market trading, reflecting investor optimism. According to InvestingPro analysis, Gates Industrial maintains strong financial health with a Fair Value suggesting slight undervaluation at current levels. The company’s robust current ratio of 3.2x indicates excellent liquidity management, while its Altman Z-Score of 3.29 suggests solid financial stability.

Key Takeaways

• Gates Industrial’s Q1 2025 EPS of $0.36 beat forecasts.
• Revenue reached $848 million, exceeding expectations.
• Stock price increased by 3.14% in pre-market trading.
• Core growth was positive at 1.4%.
• Gross margin remained robust at 40.7%.

Company Performance

Gates Industrial demonstrated solid performance in Q1 2025, with total sales of $848 million and a positive core growth of 1.4%. The company maintained a strong gross margin of 40.7%, marking the fourth consecutive quarter above 40%. This performance indicates resilience in the face of a challenging market environment, particularly within the automotive sector, where builds are expected to decline by 10% year-over-year. InvestingPro data reveals the company has maintained profitability over the last twelve months with a healthy EBITDA of $713 million. Get access to 12+ additional ProTips and comprehensive analysis with an InvestingPro subscription. Despite these challenges, Gates Industrial’s diversified industrial market is stabilizing, and the personal mobility market is recovering.

Financial Highlights

• Revenue: $848 million (exceeded forecast of $822.93 million)
• Earnings per share: $0.36 (beat forecast of $0.33)
• Adjusted EBITDA: $187 million (22.1% margin)
• Gross margin: 40.7%
• Net leverage: 2.3x

Earnings vs. Forecast

Gates Industrial outperformed expectations with an EPS of $0.36 against the forecasted $0.33, a surprise of approximately 9.1%. Revenue also came in stronger than anticipated, reaching $848 million compared to the expected $822.93 million. This positive surprise reflects the company’s effective cost management and operational efficiencies.

Market Reaction

Following the earnings announcement, Gates Industrial’s stock price rose by 3.14% in pre-market trading, closing at $17.98. This movement positions the stock closer to its 52-week high of $23.85, indicating favorable investor sentiment. The stock’s performance aligns with broader market trends, where industrial stocks have shown resilience despite economic uncertainties. Analyst consensus from InvestingPro suggests further upside potential, with price targets ranging from $20 to $27. The company’s beta of 1.24 indicates moderate market sensitivity, while maintaining strong returns on invested capital of 7%.

Outlook & Guidance

For the remainder of 2025, Gates Industrial anticipates core revenue growth ranging from a decline of 0.5% to an increase of 3.5%. The company projects adjusted EBITDA between $735 million and $795 million, with an adjusted EPS estimate of $1.36 to $1.52. InvestingPro analysis shows the company has demonstrated strong returns over the past five years, with analysts predicting continued profitability this year. Discover detailed valuation metrics, comprehensive financial health scores, and expert insights with an InvestingPro subscription, including access to the full Pro Research Report covering Gates Industrial among 1,400+ top US stocks. Gates Industrial is confident in its ability to offset a $50 million tariff impact through pricing and operational initiatives.

Executive Commentary

CEO Ivo Jurek emphasized the company’s proactive cost management and readiness to adapt to economic challenges. "We are managing costs more closely and we are prepared to take additional actions as needed," Jurek stated. CFO Brooks Mallard added, "We anticipate fully offsetting the incremental tariff impacts estimated to be incurred this year."

Risks and Challenges

• Potential tariff impacts on supply chain and pricing.
• Decline in automotive builds by 10% year-on-year.
• Softness in construction and agriculture markets.
• Economic uncertainties that may affect industrial demand.
• Competitive pressures in key markets.

Q&A

During the earnings call, analysts inquired about the absence of pre-buy activity in Q1 and the implementation of pricing increases in Q2, expected to be realized in Q3. Management expressed confidence in managing tariff impacts and emphasized ongoing improvements through the 80/20 operational model.

Full transcript - Gates Industrial Corporation plc (GTES) Q1 2025:

Greg, Conference Operator: Thank you for standing by. My name is Greg, and I will be your conference operator today. At this time, I would like to welcome everyone to today’s Gates Industrial Corporation Q1 twenty twenty five Earnings Call. All lines have been placed on mute to prevent any background noise. After the speakers’ remarks, there will be a question and answer session.

Thank you. I would now like to turn the call over to Rich Kwas, Vice President of Investor Relations. Rich?

Rich Kwas, Vice President of Investor Relations, Gates Industrial Corporation: Greetings and thank you for joining us on our first quarter twenty twenty five earnings call. I’ll briefly cover our non GAAP and forward looking language before passing the call over to our CEO, Ivo Jurek, who will be followed by Brooks Mallard, our CFO. Before the market opened today, we published our first quarter twenty twenty five results. A copy of the release is available on our website @investors.gates.com. Our call this morning is being webcast and is accompanied by a slide presentation.

On this call, we will refer to certain non GAAP financial measures that we believe are useful in evaluating our performance. Reconciliations of historical non GAAP financial measures are included in our earnings release and the slide presentation, each of which is available in the Investor Relations section of our website. Please refer now to Slide two of the presentation, which provides a reminder that our remarks will include forward looking statements within the meaning of the Private Securities Litigation Reform Act. These forward looking statements are subject to risks that could cause actual results to be materially different from those expressed in or implied by such forward looking statements. These risks include, among others, matters that we have described in our most recent annual report on Form 10 ks and in other filings we make with the SEC.

We disclaim any obligation to update these forward looking statements. We will be attending the Wolfe Global Transportation and Industrials Conference and KeyBanc Industrials and Basic Materials Conference next month and look forward to meeting many of you. Before we start, please note all comparisons are against the prior year period unless stated otherwise. Now I’ll turn the call over to Ivo.

Ivo Jurek, CEO, Gates Industrial Corporation: Thank you, Rich. Good morning, everyone, and thank you for joining our call today. Let’s start on Slide three of the presentation. Our first quarter sales outpaced our initial guidance supported by positive core sales growth of 1.4% with both volume and price contributing. Our replacement channel sales grew mid single digits driven by high single digit growth in automotive replacement.

At the end market level, ongoing softness in the agriculture and construction markets and weakness in energy were more than offset by strong growth in personal mobility and mid single digit growth in our automotive end market all in. Our adjusted EBITDA margin exceeded 22% and our gross margin expanded to 40.7%. We continue to advance our various enterprise initiatives, which are primarily focused on gross margin improvement. Our net leverage finished at 2.3 times at the quarter end and decreased slightly year over year. Our free cash flow performance was consistent with normal seasonality.

Our balance sheet is in solid shape. We repurchased $13,000,000 of our shares during the quarter and have over $100,000,000 remaining under our existing authorization. We are maintaining our initial 2025 financial guidance. We have implemented actions to mitigate the relevant tariff impact on our business based on current tariff rates with price increases being the predominant tool. Our existing in region, for region operational structure limits the present tariff regime exposure and we anticipate offsetting the estimated tariff impact through price implementation and various operational initiatives.

Brooks will provide more detail on our exposure in a few minutes. Since the U. S. Presidential Administration’s announcement on tariffs on April 2, we have not observed a noticeable change in customer demand or behavior. That said, there is more uncertainty in the market now relative to the start of the year and we continue to exercise a healthy dose of pragmatism in our forward planning.

We are managing costs more closely and we are prepared to take additional actions as needed. Our manufacturing footprint is largely in Region 4 Region, which we believe is an advantage relative to our competition. Furthermore, since 2022, we have worked extensively to optimize our sourcing and logistic networks. We are well positioned to continue to deliver further optimization as the current tariff policies take additional hold. Our seasoned management team has experienced multiple economic cycles as well as previous supply chain dislocations.

I’m confident in our team’s ability to effectively manage our business as we enter this period of increased uncertainty. Please turn to Slide four. First quarter total sales were $848,000,000 which translated to core growth of 1.4% and was slightly better than our guidance. Total revenues were down just under 2%, inclusive of unfavorable foreign currency effects. Our automotive growth was healthy, supported by the replacement channel growing high single digits on a core basis, which more than offset weakness in automotive OEM.

Industrial end market demands generally remain soft, although core revenue decreases were less of a headwind relative to prior quarters. Personal mobility continued to recover and contributed nicely with more than 30% growth. This was offset by continued soft demand in the agriculture and construction end markets, which decreased in the mid single digits. We experienced greater stability in the industrial replacement channel with core sales performance about even with the prior year period. Book to bill finished just above one for the quarter.

In general, business activity followed our normal seasonality and we did not observe material pre buy activity during the quarter. Adjusted EBITDA was $187,000,000 and represented a margin rate of 22.1%, a decrease of 60 basis points. The year over year margin performance was in line with the midpoint of our guidance. Recall, we had a non recurring profit benefit primarily related to insurance proceeds in the prior year period that added approximately 100 basis points to last year’s margin performance. Gross margin measured 40.7% and we exceeded the 40% threshold for gross margin for the fourth consecutive quarter.

Adjusted earnings per share was $0.36 an increase of approximately 6%. Underlying operating performance was positive, although offset by the non recurring favorable items from last year discussed earlier and unfavorable foreign exchange. Lower interest expense and lower share count combined contributed about $03 to adjusted earnings per share. On Slide five, we’ll review our segment highlights. In the Power Transmission segment, we generated revenues of $527,000,000 in the quarter, which translated to approximately 2% increase on a core basis.

The replacement channel was up year over year led by mid single digit growth in automotive replacement. Overall, our transmission OEM sales were slightly down driven by high single digit decrease in automotive OEM sales. Industrial OEM sales benefited from double digit growth in personal mobility. Demand was muted across the balance of industrial end markets in Power Transmission. In the Fluid Power segment, our sales were $320,000,000 On a core basis, sales were approximately flat.

Demand in the replacement business was healthy, supported by automotive replacement, which grew mid teens. Industrial replacement stabilized with sales approximately flat. Industrial OEM sales declined low double digits on a core basis. With respect to profitability, both segments were impacted by foreign currency headwinds as well as incremental SG and A expenses related to investments in system improvements we referenced on our last earnings call. The Power Transmission segment partially offset these headwinds with benefits from strengthening recovery in personal mobility, while the Fluid Power segment experienced greater margin pressure due to ongoing demand softness in the agriculture and construction end markets.

I will now pass the call over to Brooks for further comments on our results.

Brooks Mallard, CFO, Gates Industrial Corporation: Thank you, Hito. I’ll begin on slide six and review our core sales performance by region. North America returned to growth in the quarter, while China and East Asia continued to experience positive core sales growth consistent with the trend experienced during the second half of last year. EMEA and South America both declined year over year. In North America, core sales grew low single digits driven by mid teens growth in automotive replacement.

The underlying demand in the channel remains constructive further supported by incremental revenue from inventory load in with a new channel partner. Personal mobility core sales also increased double digits. This growth was partially offset by lower OEM demand. Industrial OEM channel sales decreased low teens. In EMEA, core sales fell just under 1%.

OEM sales were approximately flat with automotive weakness offset by growth in industrial. Industrial OEM sales were supported by recovery in personal mobility. Replacement sales were mixed with automotive replacement core growth in the low single digits and industrial replacement down mid single digits. The energy end market continued to be a headwind within the region’s results. China core sales expanded 3.5% with broad based growth.

Industrial end markets grew mid single digits with diversified industrial being a significant contributor. OEM sales grew low single digits with industrial growth offset by weakness in automotive. The replacement channel grew mid single digits supported by growth in both industrial and automotive. East Asia and India posted approximately 5% growth in core sales. Automotive replacement, diversified industrial and personal mobility were the major contributors.

South America core sales declined low single digits. On slide seven, we lay out the key drivers of our year over year change in adjusted earnings per share. Operating performance contributed approximately $04 per share driven by gross margin expansion. The operating performance was offset by unfavorable foreign currency and a $02 per share headwind from the non recurring favorable items realized in the prior year period. Lower interest expense, a lower share count and higher other income collectively contributed $04 per share.

Slide eight has an update on our cash flow performance and balance sheet. Our free cash flow for the first quarter was an outflow of $19,000,000 which is in line with our normal seasonal performance. As we mentioned on last quarter’s call, we have increased our CapEx investments this year to support key footprint optimization and system enhancement projects. Our net leverage ratio declined to 2.3 times, which was a 0.1 times improvement relative to the prior year period. We repurchased $13,000,000 of our shares in Q1 and have over $100,000,000 remaining under our existing authorization.

Our trailing twelve month return on invested capital was 22.5%, a modest decline compared to the prior year. Our capital spending has increased to support projects that we anticipate will contribute to future expansion of our return on invested capital. Turning to our 2025 guidance on slide nine, we are reiterating our full year 2025 guidance, which includes core revenues to be in the range of down 0.5% to up 3.5% relative to 2024. Adjusted EBITDA is forecasted to be in the range of $735,000,000 to $795,000,000 and adjusted earnings per share is estimated to be in the range of $1.36 per share to $1.52 per share. These ranges incorporate the anticipated incremental impact of all enacted tariffs, which I will cover in more detail in a moment.

Additionally, we still anticipate capital expenditures of approximately $120,000,000 and free cash flow conversion to exceed 90% of our adjusted net income. For the second quarter, we estimate total revenues to be in the range of $845,000,000 to $885,000,000 and core revenues to be approximately flat at the midpoint. For the second quarter, we expect our adjusted EBITDA margin to decrease in a range of 10 basis points to 60 basis points compared to Q2 of twenty twenty four. Recall that we had a non recurring real estate gain in last year’s second quarter that contributed approximately 80 basis points to last year’s adjusted EBITDA margin. On slide 10, let’s discuss our tariff exposure based on the current landscape and the associated mitigation actions we are implementing.

Based on all enacted tariffs as of April 29, we estimate our exposure is approximately $50,000,000 for 2025. At the regional level, North America represents about $35,000,000 of the tariff cost and our exposure in China is approximately $15,000,000 The impact in other geographies, including the EU, is estimated to be immaterial. We intend to offset the majority of our estimated tariff impact with price actions. We communicated price increases to our channel partners in early April and expect price realization to match the timing of the incoming tariff cost. Furthermore, we are employing various operational initiatives to mitigate potential margin erosion from the inactive tariffs.

Assuming the state of play as of today, we intend to fully offset the incremental tariff impacts estimated to be incurred this year and anticipate no meaningful impact to our adjusted EBITDA for the full year. I will now turn the call back over to Ivo.

Ivo Jurek, CEO, Gates Industrial Corporation: Thank you, Brooks. On Slide 11, I’ll summarize before we take your questions. First, we are pleased with the start to the year. Core growth was slightly positive and our underlying operating performance was rather strong when considering the non recurring positive items from last year’s first quarter and the headwind caused by foreign exchange. Our gross margins continue to increase.

Second, customer demand so far in the second quarter has been consistent with our initial guidance. However, we acknowledge there are potential risks to demand as the existing tariff regime becomes further entrenched. As such, we are tightening our focus on our compressible cost structure such as SG and A and other spending. We have action plans prepared to implement should demand trend soften relative to our expectations. Third, I would like to reemphasize that our team is seasoned and has been through periods of business uncertainty in recent times.

Our global teams are working closely together to fully mitigate the tariff dollar cost impact. Additionally, we continue to progress our enterprise initiatives, which we believe will structurally improve our cost base for the long term and help mitigate tariff headwinds in the short term. Lastly, I want to accentuate that our balance sheet is in a strong position and we have significant capacity to deploy capital. We have over $100,000,000 remaining under our existing share repurchase authorization and plan to be opportunistic deploying capital. Before taking your questions, I want to extend my gratitude to more than 14,000 Global Gates associates for their dedication, focus on execution to our customers’ expectation and resiliency, especially during this period of macroeconomics and geopolitical uncertainty.

With that, I’ll now turn the call back over to the operator for Q and A.

Greg, Conference Operator: Thank you so much. And it looks like our first question today comes from the line of Michael Halloran with Baird. Michael, please go ahead.

Ivo Jurek, CEO, Gates Industrial Corporation: Hey, thank you. Good morning, everyone.

Brooks Mallard, CFO, Gates Industrial Corporation: Michael. Good morning, Michael. Hey, so just on the tariff side

Michael Halloran, Analyst, Baird: of things, obviously, very clear messaging that on a dollar basis, you’ll be offsetting the tariff impact. Maybe just talk about how that cadence thing works out as you look through the remainder of the year. Is there any mismatch as you think about it into Q3, Q and then fully catch up by the fourth quarter? Kind of how does that dynamic play out? And then secondarily, if you could add just how you feel about your competitive positioning, all else equal, from a global footprint perspective?

Brooks Mallard, CFO, Gates Industrial Corporation: Michael. I’ll take the first part and I’ll let Ivo take the second part. So from a dollars perspective, we expect not to be negative in any quarter. We expect second quarter to be minimal impact. And then we expect third and fourth quarter to be matched pretty closely.

And so very immaterial impact from a dollars perspective. We do expect about a 25 bps EBITDA margin dilution for the year because it’s dollar for dollar, but no but 0 dollar impact. And no real kind of quarter to quarter impact is going to be material. So I’ll let Ivo handle the second part there.

Ivo Jurek, CEO, Gates Industrial Corporation: Yes. Let me chime maybe additional clarity. I’m sure that there’s going to be a ton of questions around the tariffs, but maybe put a pin into it. Look, we anticipated about 75% to 80% of that $50,000,000 will be offset with price. So we got about 20% to 25% that we anticipate to offset through operational initiatives and supply chain realignment.

I will remind you that we have done lots of supply chain realignment and reconfiguring post Ukraine Russia conflict. So we feel that we are reasonably well positioned to be able to drive that forward. As to the competitive positioning, look, we have done a lot since frankly, since Blackstone bought the company ten years ago, we’ve started to position the organization for in region, for region manufacturing philosophy. And so we have been doing quite a bit. Let me remind you that in twenty seventeen, eighteen, nineteen, we’ve put a bunch of monuments in the ground and rebuilt our operational capacities.

So we’ve been well positioned. And I feel that today, we have one of the better footprints to be able to deal with the disruptions that we are seeing that were brought by this tariff regime. So I think that we are competitively well positioned. I know that we are all focusing on some of the impediments, and there are impediments that we will need to operate through. That being said, we do also see ton of new opportunities out there, particularly in United States because we are well positioned.

So while we are pragmatic in our approach and we are focusing on operational cadence and offsets to what we see today through this regime, we are also being very agile in focusing on new opportunities in the marketplace.

Michael Halloran, Analyst, Baird: That makes a lot of sense. Appreciate that. And then a follow-up, just maybe where an update on where we stand on the internal initiatives progress and tying it to the current trends. I’m assuming the dynamics that are happening in the tariffs that don’t impact your ability to push forward with the internal initiatives. But is there an opportunity to pull that forward even more if demand softens?

And and maybe how does how does that, correspond or interrelate to the tariffs remediation actions you’re taking?

Ivo Jurek, CEO, Gates Industrial Corporation: Yes. I think there’s a lot to unpack in this short question, think, Mike. But let me say that vis a vis initiatives, the corporate eightytwenty driven activities, we have had rather solid execution. And I would say, in general, we are a little bit ahead of our schedule. And that frankly filters in the gross margin performance, again, another quarter of north of 40% gross margin.

So we are well on track to deliver on what we’ve committed to our shareholders. Again, we have done ton of work on material cost out as a huge opportunity. You saw big progress last year. We continue on the trajectory in 2025 and we feel reasonably confident that we’re going to see another year of strong performance here. The underlying productivity and price are additive to what we are doing.

So that all is helping out to offset these headwinds that we are seeing right now. And look, the footprint optimization that we have discussed, that’s going to build on its progress as we continue to progress through the year. And remember, it really is a little more complex. It’s not as, hey, look, we have a window, so we’re to pull some things forward. We have a scheduled delivery of new equipment that we are installing that, generally speaking, is fixed under fixed lead times.

And that’s really kind of the gating item on your ability to pull anything forward. But that being said, there are other things that are under control that we can manage through as we see more of these impediments being layered in. We can manage compressible costs. There’s ton of compressible costs across the company. And we are tremendously focused on managing those, controlling those and being very cognizant that we want to ensure that we protect our underlying operating margins.

So I know it’s a long winded answer, but hopefully I have captured the essence of what your question was.

Michael Halloran, Analyst, Baird: You did. Thanks, Ivo. Appreciate it guys.

Brooks Mallard, CFO, Gates Industrial Corporation: Thanks, Mike. Thanks, Mike.

Greg, Conference Operator: And our next question comes from the line of Julian Mitchell with Barclays. Julian, please go ahead.

Julian Mitchell, Analyst, Barclays: Hi, good morning. Maybe just wanted to start with a demand question. So you’ve given sort of very good color on the geographic sort of trends. Maybe just thinking about the end markets for a second. You gave a good update on the end market expectations globally on the prior call.

Just wondered how those have moved around since then. I suppose, in particular, sort of interested in the perspective on personal mobility, where it looks like a stronger start to the year than the full year guide had implied? And also any help you could give us on what’s happening in the auto world at the moment and not just demand, but kind of how are your products into auto? Are we bracketed in terms of tariff classifications?

Ivo Jurek, CEO, Gates Industrial Corporation: Good morning, Julien. Again, a lot to unpack. So hopefully, you don’t mind a long winded answer in here, but let me try to hit on all of these points. Look, when we let’s just kind of ground ourselves up as the year started, we did not expect any meaningful recovery in the first half. And it was for a number of different reasons, to do with tariffs, obviously.

But we just were waiting for the PMIs to recover. And we thought that we have pretty well bracketed a much slower recovery in the first half. And I think that the general underlying demand is frankly not playing significantly differently than what we have anticipated. Yes, there are some incremental headwinds now that I think everybody is getting more concerned, and we’ll obviously manage those. 1Q came a little bit better than what we expected, and Q2 is looking very much in line with what our expectations are vis a vis order rates, exit order rates from Q1 and frankly order rates that we have seen throughout April month to date.

So I feel that we are reasonably well positioned to support what we have just shared with you all. We’ve always anticipated now starting to hit on some of the end markets. Look, we’ve always anticipated that auto builds would be down. We felt when we were coming into the year, we felt that all the forecasts that were being done by the third party were a little bit too optimistic. And we were much more negative on auto builds when the year started.

The auto builds got a little worse, obviously, particularly exiting Q1 into Q2. But it’s more around the edges. Our sense was that the auto builds globally will be down around mid single digits. What we are seeing now is more down high single digits. I would not be surprised if for the year, at least for the next couple of quarters, we see out of builds being down kind of around the 10 range year on year.

And we’ve kind of bracketed that in our forecast. Conversely, what we do see and frankly, when we came IPO, that was kind of the pretext of our thesis. We see the other replacement market being quite robust. And when you take a look at even the reporting channel partners that we have had so far, the market is not that bad. They’ve reported positive store comps.

And we’ve reported rather robust AR performance with high single digits. But I would remind you that that’s predominantly on the back of the market share gains that we have had last year. So both of these are additives, but the underlying AR market is rather okay. And if you take into an account the aging car fleet, employment is still rather okay, people still they are going to probably cut flights, but they’ll still want to go visit grandma and family. And so they’ll instead of taking a plane, they’ll drive a little bit longer.

So all of that bodes well for AAR, and we anticipate that that’s going to be accretive for the year. If I think energy, energy, we had a muted outlook and energy got a little bit weaker when you take into account the deceleration in price of oil and what I think is anticipated slowdown in the global economy. That got around the edges weaker. Off highway, we felt that, that was going to be kind of neutral. That is maybe down mid single digits, so slightly worse than what we have anticipated.

Construction and ag came in about what we’ve anticipated. Again, I’ll remind everybody that construction and agriculture was rather negative in particularly in the second half of last year. The machine builds were between 2030% in the second half. So that not being as bad, but still being negative is what they anticipated. You could anticipate that, that gets slightly worse.

But I think that taking into account how negative the off highway ag and construction equipment performed last year, my sense is that it’s going to be more around the edges negative, not dramatically more negative. So that, I think, is kind of okay. And the Diversified Industrial, Diversified Industrial hung in there. That came about flattish for the quarter. And we anticipate that that’s going to hang in there.

But again, I’ll remind everybody that it was about a negative for seven to eight quarters in 2024 and 2023. So the inventories are very lean in a channel. And I think channel partners actually are performing a little bit better than some of the orders that we see that we have seen. So we have seen the incoming orders being slightly under what our channel partners are consuming. So I feel that, that end market is around the edges as we’ve anticipated and maybe leaning more slightly positive.

And then the last piece is personal mobility that came very robust. And I know that maybe the first question is going to be pre buys. We did not see any pre buys from our channel partners. We have plenty of capacity. We have predominantly in Region 4 region in that end market.

The biggest growth that we have seen came out of Europe and Asia for consumption in Europe and Asia. So we did not necessarily feel that there was any pre buy associated with that. So I know I’ve given you a long winded answer, but I wanted to make sure that I fully encompass in my answer the essence of your question.

Julian Mitchell, Analyst, Barclays: That’s super helpful. Thanks very much, Ivo. And just one very brief follow-up. The sort of auto sector and auto parts has a lot of unique things going on, on the tariff front and how things are classified or exempted and so on. Maybe just help us understand your own it’s a small part of the company now, high single digit share of sales, but your own auto OE business, within The U.

S, Are those sort of classified within what we see going on with the broader auto companies in terms of tariff movements or it’s sort of different to them?

Ivo Jurek, CEO, Gates Industrial Corporation: Yes. I apologize. I forgot that part of the question, Julien. That is not that big of a concern for us for the OEs because if I take a look at what we do out of our plants Mexico for the other OEs, they pick up in Mexico. So we are really not responsible for whatever the tariff situation would be.

And most of everything that we do in Mexico and in Canada for other components is UMCA compliant as well. So that’s not that critical. And we really don’t export anything from The U. S. To Europe as an example.

And I think that you saw it on that tariff summary that we have had in the slide deck that we have de minimis exposure in Europe as an example to any tariffs. So the other components are very, very neutral for us vis a vis the OEs.

Julian Mitchell, Analyst, Barclays: Great. Thank you.

Greg, Conference Operator: All right. Thank you, Julien. And our next question comes from the line of Jeffrey Hammond with KeyBanc Capital Markets. Jeffrey, please go ahead.

Jeffrey Hammond, Analyst, KeyBanc Capital Markets: Hey, good morning guys.

Brooks Mallard, CFO, Gates Industrial Corporation: Good morning, Jeff. Good morning.

Jeffrey Hammond, Analyst, KeyBanc Capital Markets: Just on the core growth, unchanged, I just wanted to understand some of the moving pieces there. One, kind of what’s the magnitude of the price increases that you’ve announced? What incremental pricing do you have in the guide? And then FX, think, was a 2.5, three point headwind and $34,000,000 on EBITDA. Just how are you thinking about that?

And then I guess the offset would be lower volume.

Brooks Mallard, CFO, Gates Industrial Corporation: Right. So let me kind of walk through that. So in our presentation, we talked about offsetting the $50,000,000 of tariff impact with 75% to 80% on pricing. And then we now think that we’re thinking that the other $10,000,000 is going to be offset with operational improvements and supply chain changes and things like that. So we didn’t change our guide from a core growth perspective.

So that $40,000,000 kind of comes out of volume when you think about it over the balance of the year. That’s kind of what Ivo was talking about earlier, some of the weaker OEM, particularly around automotive sector and then also the industrial sector. So that’s kind of the offset there, right? I think from an FX perspective, we’re seeing about 100 bps less of a headwind than we initially thought. And that filters through the EBITDA kind of in a normal fashion.

So not as much headwind as we were thinking from an FX perspective. And we based that on the March, end of Q1 rates and those move around quite a bit. And so those will flex through the year and there’ll be we’ll update those impacts as things move around. But they’ve moved around quite a bit since the end of the year up through now. So we’ll continue to update those depending on what FX what the prevailing FX rates are.

Jeffrey Hammond, Analyst, KeyBanc Capital Markets: Okay. And then just a follow-up. Can you just quantify your manufacturing base in Mexico? And then anything you can do to kind of inch up that USMCA compliance closer to 1%? Thanks.

Brooks Mallard, CFO, Gates Industrial Corporation: Yes. So look, I think there’s the things that we could do on the USMCA compliance is probably more around our manufacturing base in The U. S. We have some flexibility in terms of where we manufacture things and we have capacity that we’ve added, not just in Mexico, but also in The U. S.

In new machinery and equipment and things like that. And so depending on the tariffs and where we source things from and things like that, our biggest kind of flex where we can offset the tariffs and it’s always going to be a cost versus the tariff cost, right, internal cost versus the tariff cost is really take advantage of our U. S. Footprint, which is still pretty substantive in terms of manufacturing. And so that’s really what we’re looking at.

When we talk about the $10,000,000 of offset from a sourcing and operational perspective, that’s what we’re talking about. Can we do more stuff in The U. S. That’s less impacted by tariffs and things of that nature. So that’s going to be the biggest thing we can do to offset or to kind of bump up the USMCA compliance aspect.

Ivo Jurek, CEO, Gates Industrial Corporation: And Jeff, I would add that USMCA noncompliance is really diminutive around the edges for us. I mean, it’s almost immaterial in nature.

Jeffrey Hammond, Analyst, KeyBanc Capital Markets: And what’s the mix of your manufacturing base in Mexico?

Ivo Jurek, CEO, Gates Industrial Corporation: In Mexico, we manufacture every product that we manufacture in The U. S. So we have full footprint on product transmission. We have a full footprint for Fluid Power. And so we can manufacture just about everything in Mexico that we can manufacture in The U.

S. With the exception of mobility products. Mobility products, we can only manufacture out of United States plant.

Brooks Mallard, CFO, Gates Industrial Corporation: Okay. Thank you.

Greg, Conference Operator: Thanks, Jeff. And our next question comes from the line of Nigel Coe with Wolfe Research. Nigel, please go ahead.

Nigel Coe, Analyst, Wolfe Research: Thanks. Good morning, guys. Great color on the Good morning. It sounds like about two points of price coming through in the back half of the year. But is the plan to concentrate those price increases in The U.

S. So therefore, we’re looking at maybe, I don’t know, 4% to 5% price increase in The U. S. And or are you going to spread the love across the whole portfolio? So that’s the first part of the question.

And the second part would be, do you have material material is the wrong word, do you have larger competitors that don’t have the same sort of local for local manufacturing footprint? So importing more into China or importing more from China into The U. S, less USMCA compliance in Mexico. Just wondering if there’s any competitive differentiation here?

Brooks Mallard, CFO, Gates Industrial Corporation: Yes. So I’ll take the first part of your question. So look, the pricing is really based on it’s not as regionally based as it is more what can we do to offset the sourcing where we source from or where we make stuff from and kind of what’s the net impact that needs to be passed along, right? And so I would say probably a little bit more pricing maybe in The U. S, but really that’s based on just your ability to run it, reconfigure your supply chain, reconfigure your manufacturing base and then kind of the net impact of the tariff versus the increased cost, right?

So we’re going to have pricing all over the world where we’re impacted by tariffs, but that’s largely going to be based both the supply chain aspect of it and the manufacturing aspect of it. So hopefully that answers that part of the question.

Ivo Jurek, CEO, Gates Industrial Corporation: And on the competitive positioning, Nigel, I would say that we are probably best positioned for manufacturing footprint. Again, as you saw from our quantification of the tariffs, I mean, for us, while I don’t want to diminish $35,000,000 of tariff impact on about $1.6 1 point 7 billion dollars North America base of revenue, it’s really not that substantial. And that just gives you an indication that we have a full capability to do everything in region for region. We predominantly are dealing with more of a raw material supply that impacts that number, not necessarily imports of finished goods into The U. S.

And so most of our competitors are foreign competitors. And many of them or some of them have some limited capabilities to do either some limited assembly or they have capability to build some of these products. But we have very few competitors. I’d say maybe Parker in Fluid Power, I would say, is probably somebody that comes to mind that has a very similar footprint to Gates. But outside of that, I think everybody else is in less favorable position than Gates Corporation and maybe Parker in Fluid Power.

In the Power Transmission side, we just simply have the biggest footprint, and we are well positioned to be able to deal with this. And we will continue to lean towards taking advantage of competitive positioning.

Nigel Coe, Analyst, Wolfe Research: Great. And then my follow-up question is just changing gears a little bit. I know liquid cooling is a very small business today, but it’s got good potential. So it does sound like that value chain is starting to crank in the gear. So just wondering if you’re seeing that and any color there?

Ivo Jurek, CEO, Gates Industrial Corporation: Yes. Well, thank you for asking that question actually. We’ve kind of omitted it from the update today, not for any other reasons other than we understand that there are some other more pressing issues. But look, we continue to have a growing we continue to have a really good growing engagement with a very significant number of new customers from server manufacturers, system integrators, all the way to kind of the data center operators and hyperscalers. So we feel pretty good at what’s happening.

We are in various stages of testing and validation of our products in these applications as we speak. I’ve just had a couple of reviews on our e water pump that goes into data centers and rather significant number of opportunities that we are in a position to capitalize on. And we are rushing sample builds and validation of those samples. And frankly, interestingly enough, it’s not just in The U. S, but it’s in Asia as well.

We’ve seen a rather nice step up in significant interest for our water pump in particularly in Taiwan and in China as these companies, particularly on the ESM side, are ramping up build out of more advanced white boxes and branded boxes in the server side. So that’s really exciting. We are in kind of final stages with hyperscaler in validation of assemblies that have a very unique value proposition. We have not seen any slowdown, frankly, in interest. If anything, there’s been a rather nice step up in the set of opportunities on which we are quoting or delivering samples.

So I’m quite confident that not too distant future, we’re going to be talking about business that is going to be ramping up rather than on opportunities that we are quoting or we are engaged in validation testing on.

Nigel Coe, Analyst, Wolfe Research: That’s great. Thank you.

Greg, Conference Operator: Thanks, And our next question comes from the line of Deane Dray with RBC Capital Markets. Deane, please go ahead.

Rich Kwas, Vice President of Investor Relations, Gates Industrial Corporation: Thank you. Good morning, everyone.

Ivo Jurek, CEO, Gates Industrial Corporation: Good morning, Deane.

Rich Kwas, Vice President of Investor Relations, Gates Industrial Corporation: Hey, maybe we could talk about the channel, your channel partners, inventory in the channel sell in, sell through. I appreciated that you called out early in your prepared remarks that you did not benefit from any sort of pre buy. I trust that was in reference to the channel partner activity. But just what’s your assessment? How you think they react during the course of tariff mitigation?

Ivo Jurek, CEO, Gates Industrial Corporation: Yes. Thank you for the question, Deane. Look, we

Jeffrey Hammond, Analyst, KeyBanc Capital Markets: have

Ivo Jurek, CEO, Gates Industrial Corporation: not observed any meaningful change in behavior through the April. These channel partners, I think one of the pragmatic issue is that these folks are buying millions of SKUs, as you can imagine. And I think it’d be rather difficult for them to pull demand forward. Maybe they would do something on some critical components. But the availability of our products on a short cycle is very good.

Our service rates are very good. And the cost of our products in a system is frankly still de minimis despite the fact that we offer mission critical support in applications. So we have not really seen any meaningful pull forward. When I take a look at the sales in versus sales out statistic from our major channel partners. We have been very much in balance with sales out.

And I would say maybe even around the edges, we are underselling into the channel versus what we are seeing with our channel partners sales out. So that would tell me that from the data that I see, there has not been any meaningful change in behavior. That being said, look, we are super short cycle company. And we if things change, we will see them change. But I have characterized that through April, we feel reasonably good about where we sit.

The demand is very much in line with our expectation, both from our original assumptions as we were coming into the year as well as with how we have quantified the second quarter guidance today.

Rich Kwas, Vice President of Investor Relations, Gates Industrial Corporation: Great. Any line of sight on new channel partners you might be adding? And what’s the update and status on the latest one that you added?

Ivo Jurek, CEO, Gates Industrial Corporation: Well, the latest one, we are fully ramping up. We should be completely ramped up with that channel partner within this quarter. And so from kind of the second half of the year, it’s going be more run rated state of business. There are still some other opportunities for other product lines that we can secure that we are working on. And I’m not in a position to be talking about any other incremental channel partners.

But again, as I said, as a part of my answer to Nigel, I think that we will have incremental opportunities and we will let you know as we are capturing those opportunities into the future. Thank you. Thanks, Deane. Thank you.

Greg, Conference Operator: And our next question comes from the line of Chris Snyder with Morgan Stanley. Chris, please go ahead.

Chris Snyder, Analyst, Morgan Stanley: Thank you. I just want to follow-up on the commentaries around potential pre buy. And I know it’s probably hard to always know exactly what’s happening. But I guess what gives the company confidence that there wasn’t any pull forward in Q1? And I asked because it’s the first quarter of positive organic growth in a couple of years.

Would you guys attribute that improvement in growth just to the new customer wins in the quarter? Thank you.

Ivo Jurek, CEO, Gates Industrial Corporation: Yes, Chris. Thank you. Good morning and thank you for your question. Look, I will come back to my answer that I just provided to Dean. I can only look at the data that is available to me.

And the data would indicate that actually we were probably around the edges, a little bit behind with receiving orders and selling into the channel, taking into an account the sales out by channel partners. And in The U. S, we actually have a reasonably good visibility to that because most of our large customers are public companies and we have good agreements with them. So we receive weekly and monthly data on their sales out into the end market. And that data would indicate that we are very much in balance and inventories have not built out.

We’ve talked about inventories in a channel coming out over the last eight quarters or so. So absent of that, the data would indicate that channel sales were balanced and there was no pre buy. The second part of your question, hey, what caused you the second part of your question associated with what’s drive what has driven that positive core growth. Well, look, first of all, I think we were reasonably pragmatic coming into the year. We really didn’t anticipate that it’s going to be a super jazz tab year.

We thought it’s going to be muted end market environment. And I think I have delineated to excruciating detail what is happening in the end markets. To Julian’s question, we see behavior that’s more in line with what we’ve anticipated. And we have had better performance out of Mobility. Mobility had seven negative quarters of growth that had that inventory has depleted and we have delivered a very strong growth in Mobility.

And then the second part of why positive growth is we have taken market share. We’ve discussed last year in AR. We continue to see very constructive end market behavior in automotive replacement, not just here in The U. S, but in Europe as well as in China. And both of those all three of these regions have continued to grow.

Our business in AR is growing nicely in India now as well. So we have done just slightly better. But I tell you, I’m not high fiving that we have delivered 1% core growth. We really would like to see much more robust growth, but that’s going to be challenging taking into an account the present economic macro.

Chris Snyder, Analyst, Morgan Stanley: Thank you. I really appreciate that thoughtful response. I guess, maybe following up, are we right to assume that the price increase that you guys are pushing through is more of a Q3 event than a Q2 event? Any color on that

Jose, Analyst, Citigroup: is helpful. Thank you.

Brooks Mallard, CFO, Gates Industrial Corporation: Yes. An implementation perspective, that’s a Q2 event. From a realization perspective, it really doesn’t impact Q2. It starts to impact Q3. And it’s really well matched with how the cost of the tariffs are going to come in, right?

I mean we’re sitting on about a quarter of inventory and that will flush through in Q2. We’ve implemented all the price increases. We’ve talked to all of our channel partners. They understand what’s coming. That will start to come in, in Q3 as well.

So like we said in the prepared remarks, the tariff impact is a relatively de minimis event in Q2, and we’ll really see that in the back half of the year, both the cost impact and the price impact and then most of the dilution impact we’ll see in the back half of the year, the EBITDA dilution impact.

Chris Snyder, Analyst, Morgan Stanley: Thank you. I appreciate that.

Rich Kwas, Vice President of Investor Relations, Gates Industrial Corporation: Thanks, Chris.

Greg, Conference Operator: Thanks, Chris. And our next question comes from the line of Andy Kaplowitz with Citigroup. Andy, please go ahead.

Jose, Analyst, Citigroup: Hey, good morning, everyone. This is actually Jose on for Andy.

Rich Kwas, Vice President of Investor Relations, Gates Industrial Corporation: Hey, Jose. How are you?

Jose, Analyst, Citigroup: Good. So maybe to start, you kind of touched on eightytwenty question. But putting in here, could you give us an update on how the implementation has been progressing? And if you’re planning to accelerate that in 2025 to offset the potential margin dilution from tariffs? You’ve talked in the past, North America is fully on board with the front end and you’re making progress on the back end.

And there’s still plenty of runway in Europe, which could help you offset some of the weakness in that region. So any color here would be helpful.

Ivo Jurek, CEO, Gates Industrial Corporation: Look, eightytwenty is becoming central part of our operating business model and kind of operating DNA, and we’re making good progress. We’re making measured progress in eightytwenty. Again, I’ll reiterate what you said. North America, progress with front end. We are now starting to address the back end in the operations.

We feel we got a ton of opportunities there. And it’s really quite actually, it’s quite interesting. It’s super powerful in the operations where we deploy on specific cells. You see a rather substantial jump in productivity. So we’ll be pretty focused in driving it across our factories in North American footprint.

And we anticipate that we’ll start pulling eightytwenty into the back end in Europe as well. We view that as certainly a lever that will be accretive to us to deal with the macroeconomic challenges. I’m not going to be sitting in here and telling you that we’re going to do better or we’re going to do worse. I think that we are laser focused. This management team is super focused on dealing with the impediments that are ahead of us.

We are all pretty sober about it. We know that things change and they changed every day. This has been one of the most difficult, most challenging seven to eight weeks that we have had since the announcement on April 2. Our management team is working super hard. All of our employees across the company are laser focused on dealing with this.

And we are fully committed and fully on board to drive the best result for our shareholders, for our customers and for all of our stakeholders across the company.

Jose, Analyst, Citigroup: Thank you. And then maybe a quick one in terms of capital deployment. You guys finished the quarter with a net leverage of 2.3, and you’ve talked about being able to reduce your leverage by half a turn in the year just based on your cash conversion, which would put you within your one to two leverage target. And you’ve talked a lot about the organic investment and the share repurchases remaining in focus, but I’m just curious if you could talk about what you’re seeing in the M and A environment?

Ivo Jurek, CEO, Gates Industrial Corporation: Yes. Look, great question. I would remain consistent with my answer. Our stock is super cheap. We will continue to be opportunistic in utilization of our $100,000,000 plus authorization that we have outstanding.

So I think that we will certainly we certainly anticipate to lean into that lever. We, in general, deliver very strong free cash flow generation in the second half of the year. So we certainly see an opportunity to continue to delever and come close to our metrics that we have committed to our shareholders. We see a really nice set of opportunities to do M and A, But before we would be doing any transactions, we’ve got to make sure that they will be accretive to our long term strategy. We will certainly be cognizant of the fact that any potential transaction would have to deliver double digit ROIC by year three.

That is non negotiable from our end. And while we see opportunities out there and there are some really nice assets that are available, we’re going to be very disciplined. We have a great company. We have a terrific strategy. I think we are executing on a trajectory that we have committed.

And we’re not under any pressure to be doing any deals that would potentially derail what we have envisaged here.

Brooks Mallard, CFO, Gates Industrial Corporation: Yes. And let me add to that. We last year, we did a lot of really, really good work. In fact, I would say best in class work around our balance sheet and our debt structure. We don’t have any big principal payments due until 2029.

We’ve locked in a pretty favorable interest rate structure in terms of what our fixed versus variable is. We’re confident in our cash flow, our ability to generate cash flow. And where the stock trading is today, we still have over $100,000,000 of authorization on share buyback in the short run here given what’s going on in the economy. That’s probably where we’ll lean into here over the short term. We’re confident in our ability to delever.

We’ve done it over time. And so the opportunity set for us right now is probably more in the share buyback side.

Jose, Analyst, Citigroup: Thanks for the time guys.

Brooks Mallard, CFO, Gates Industrial Corporation: Thanks, Jose. Thank you.

Greg, Conference Operator: And that does conclude our Q and A session today. So I will now turn the call back over to Rich Klass for closing comments. Rich?

Rich Kwas, Vice President of Investor Relations, Gates Industrial Corporation: Yes. Thanks, Craig. Thanks, everyone, for joining today. If you have any follow-up questions, please feel free to reach out, have a great rest of the week. Take care.

This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.