Earnings call transcript: MKS Instruments beats Q1 2025 forecasts, stock up 3%

Published 08/05/2025, 14:54
Earnings call transcript: MKS Instruments beats Q1 2025 forecasts, stock up 3%

MKS Instruments Inc. reported a strong first quarter of 2025, exceeding both earnings and revenue forecasts. The company reported earnings per share (EPS) of $1.71, surpassing the expected $1.44. Revenue reached $936 million, outpacing the forecasted $915.12 million. Following the announcement, MKS Instruments’ stock rose by 3.06%, reflecting investor optimism. According to InvestingPro analysis, the company is currently trading at an attractive PEG ratio of 0.24, suggesting potential undervaluation relative to its growth prospects. InvestingPro subscribers can access 10 additional key insights about MKSI’s valuation and growth potential.

Key Takeaways

  • MKS Instruments reported an EPS of $1.71, beating the forecast by $0.27.
  • Revenue of $936 million exceeded expectations by $20.88 million.
  • Stock price increased by 3.06% in response to the earnings beat.
  • Strong performance in semiconductor and electronics markets.
  • Company maintains a robust liquidity position with $1.3 billion available.

Company Performance

MKS Instruments demonstrated strong performance in Q1 2025, driven by revenue growth across all end markets, particularly in the semiconductor and electronics sectors. The company continues to focus on cost management and operational efficiency, contributing to its positive results. The semiconductor market is showing early signs of recovery, which bodes well for future growth.

Financial Highlights

  • Revenue: $936 million, up 8% year-over-year.
  • Earnings per share: $1.71 per diluted share.
  • Gross Margin: 47.4%, at the high end of guidance.
  • Free Cash Flow: $123 million, over 100% of net earnings.
  • Liquidity: $1.3 billion in cash and undrawn credit facility.
  • Gross Debt: $4.6 billion.

Earnings vs. Forecast

MKS Instruments exceeded its earnings per share forecast by $0.27 and its revenue forecast by $20.88 million. This marks a significant earnings surprise, indicating strong operational performance and effective cost management strategies.

Market Reaction

The stock price of MKS Instruments increased by 3.06%, or $2.27, following the earnings announcement. The stock’s movement is positive, with the current price at $76.57, still within the lower range of its 52-week high and low. This suggests that investors are optimistic about the company’s future performance. InvestingPro analysis indicates the stock has a beta of 1.8, suggesting higher volatility than the broader market. A comprehensive analysis of MKSI’s valuation metrics, financial health scores, and future growth potential is available in the exclusive Pro Research Report, part of the premium subscription covering 1,400+ US stocks.

Outlook & Guidance

For Q2 2025, MKS Instruments has provided revenue guidance of $925 million, plus or minus $40 million. The company expects continued strength in the semiconductor and electronics markets, driven by AI applications and market recovery. The full-year tax rate is expected to be between 18-20%, with potential tariff impacts of up to 100 basis points.

Executive Commentary

CEO John Lee stated, "The wafer fab equipment industry is a great neighborhood that’s getting better," highlighting confidence in market recovery. CFO Ram Mayamparat emphasized the company’s commitment to debt reduction, stating, "We remain committed to paying down debt."

Risks and Challenges

  • High gross debt of $4.6 billion could impact financial flexibility.
  • Potential tariff impacts may affect future margins.
  • Challenges in the specialty industrial market, particularly in automotive and general industrial segments.
  • Macroeconomic pressures could influence market dynamics.

Q&A

During the earnings call, analysts focused on the company’s outlook for the semiconductor market recovery and its strategies for mitigating potential tariff impacts. The management expressed confidence in the continued strength of AI-driven markets and reiterated its commitment to debt reduction and capital allocation.

Full transcript - MKS Instruments Inc (MKSI) Q1 2025:

Conference Operator: Good day, and thank you for standing by. Welcome to the MKS Instruments first quarter twenty twenty five earnings conference call. At this time, all participants, they are in a listen only mode. After the speaker’s presentation, there will be a question and answer session. To ask questions during the session, you will need to press 11 on your telephone.

You will then hear an automated message advising you that your hand has been raised. To withdraw your question, please just press 11 again. Please be advised that today’s conference is being recorded. I would now like to hand the conference over to to your first speaker today, Paratosh Misra, vice president of investor relations. Please go ahead.

Paratosh Misra, Vice President of Investor Relations, MKS Instruments: Good morning, everyone. I’m Paratosh Misra, vice president of investor relations, and I’m joined this morning by John Lee, President and Chief Executive Officer and Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer. Yesterday, after market close, we released our financial results for the first quarter of twenty twenty five, which are posted to our investor website at investor.mks.com. As a reminder, various remarks about future expectations, plans and prospects for MKS comprise forward looking statements. Actual results may differ materially as a result of various important factors, including those discussed in yesterday’s press release and in our most recent annual report on Form 10 ks.

These statements represent the company’s expectations only as of today and should not be relied upon as representing the company’s estimates or views as of any date subsequent to today, and the company disclaims any obligation to update these statements. During the call, we will be discussing various non GAAP financial measures. Unless otherwise noted, all income statement related financial measures will be non GAAP other than revenue and gross margin. Please refer to our press release and the presentation materials posted to the Investor Relations section of our website for information regarding our non GAAP financial results and a reconciliation to our GAAP measures. Our investor website also provides a detailed breakout of revenues by end market and division.

Now I’ll turn the call over to John.

John Lee, President and Chief Executive Officer, MKS Instruments: Thanks, Paretosh, and good morning, everyone. MKS delivered excellent results in the first quarter as we reported strong revenues, executed well on cost management, delivered to our customers’ production demand, and continued our deep technology engagements with them. First quarter revenue of $936,000,000 and gross margins of 47.4% were both at the high end of our guidance. Net earnings per diluted share of $1.71 exceeded the high end of our guidance. Our performance is a result of outstanding work by our team in a demand environment that has been showing early signs of improvement.

The announcement of new and changing trade policies since February has injected uncertainty into our industry and our end markets. Our team is working closely with our suppliers and our customers to mitigate adverse impacts from these trade policies. At present, we do not expect a material impact to revenue, but we do anticipate some near term impact on margins, as we optimize supply chain and manufacturing activities in response to the dynamic geopolitical environment. Ron will provide more details later in the call. I’ll turn now to Q1 performance in our three end markets, starting with our semiconductor market.

Revenue came in at the high end of our guidance and improved sequentially, driven by modest increases in demand for our vacuum product offerings for NAND. Specifically, our RF power solutions offerings in our plasma and reactive gas businesses performed well. NAND picked up from prior year levels as customer inventories have largely normalized and system upgrades have increased. We also saw notable order activity in thermal sensors for etch applications and reactive gases for advanced wet cleaning applications. In the second quarter, we expect semiconductor revenue to be consistent on a sequential basis, but up low double digits year over year, reflective of an environment that is steadily improving.

We are confident in our ability to outperform as the market recovery gains momentum and as our history has repeatedly shown during these upturns. Electronics and packaging revenue were also at the high end of our guidance. The better than expected result during the quarter that included the Lunar New Year was driven by increased sales of flexible PCB drilling equipment, as well as rigid PCB chemistry equipment. Some of our flexible PCB drilling equipment customers pulled forward purchases into Q1. We also saw continued momentum in orders for our chemistry and chemistry equipment for advanced multilayer boards, high density interconnects, and package substrates related to AI applications.

Our products and technologies play key roles in enabling the manufacturing of increasingly complex electronic devices in this era of heterogeneous integration. Additionally, we saw strong orders for laser equipment for low Earth orbit satellite applications, where we are the process tool of record for multiple customers, validating our position as an innovator in advanced laser technologies. Looking ahead to Q2, we expect revenue from our electronics and packaging market to be down mid single digits on a sequential basis, but up mid single digits year over year. Consistent with prior years, we believe our chemistry revenue will increase sequentially. However, we anticipate this increase will likely be offset by lower sales in our flexible PCB drilling equipment business, given the pull forward of shipments I mentioned earlier.

Our guidance implies a healthy low teens year over year growth rate for electronics and packaging in the first half of the year. Q2 is expected to be the third consecutive quarter of strong chemistry equipment revenue, which is a good leading indicator for our consumable chemistry products. Our specialty industrial revenue was above the midpoint of our guidance. Within this market, life and health sciences and research and defense end markets performed steadily, where we did see some softness across the broader industrial market, especially with automotive applications. As a reminder, our specialty industrial market consists of a variety of applications across multiple end markets that leverage existing MKS technologies.

Looking ahead to Q2, we expect revenue in our specialty industrial market to remain flattish as the broader industrial market remains soft. Overall, we executed well and delivered strong financial results in Q1. Our Q2 end market outlook and overall financial guidance reflect the increased uncertainty of the trade policies against what otherwise appears to be an early stage recovery in the end markets we serve. While we are actively working on mitigation strategies in the near term, the situation remains fluid as our customers and the broader electronics ecosystem adapt to both tariffs and their potential macroeconomic implications. That said, we believe MKS is in a strong position to manage through these uncertainties with the industry’s broadest portfolio of leading technologies, strong customer relationships, a strong financial operating model, and a team that is battle tested.

Now let me turn it over to Ram to run through the financial results and second quarter guidance in more detail. Ram?

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: Thank you, John, and good morning, everyone. We delivered strong results in the first quarter, driven by a continued recovery in demand in our semiconductor and electronics and packaging end markets, along with disciplined execution and cost management. First quarter revenue was $936,000,000 similar to last quarter, and up 8% year over year. The result was at the high end of our guidance and reflects better than expected trends across all our end markets. Excluding the impact of FX and Palladium pass through, revenue grew 10% year over year.

First quarter semiconductor revenue was $413,000,000 up 3% sequentially and 18% year over year. Excluding FX, revenue was up 20% year over year. The result was all at the high end of our expectations, as our team continued to capitalize on sequential demand in NAND, DRAM, and logic and foundry applications. Compared to last year, we saw strong performance in our plasma and reactive gas and RF power solutions businesses, reflecting benefits of NAND upgrades, as well as normalization of customer inventory. First quarter electronics and packaging revenue was $253,000,000 similar to last quarter and at the high end of our guidance.

The sequential result was led by unusually strong flexible PCB drilling and chemistry equipment sales, partially offset by normal seasonal declines in chemistry. On a year over year basis, sales were up 22%, and excluding the impact of FX and Palladium pass through, sales were up 26%. Chemistry revenue was up 8%, excluding the impact of FX and Palladium pass through, continuing the strong growth trend we have seen from last year. Flexible PCB drilling and chemistry equipment sales also rendered strong growth over prior year. As John mentioned, we see our strong equipment sales as a positive leading indicator for future chemistry sales given the historical attach rates.

In our specialty industrial markets, first quarter revenue was $270,000,000 a decline of 4% sequentially, but above our guidance midpoint. Revenue was down 13% on a year over year basis and down 11% excluding the impact of FX and Palladium pass through, primarily due to the continued softness in the general industrial and automotive markets. Moving down to the P and L, first quarter gross margin was 47.4%, which was at the high end of our guidance. We are pleased with the gross margin performance, which was up sequentially despite higher mix of equipment. This demonstrates the value our products bring to our customers and our continued execution on manufacturing excellence and supply chain efficiency.

First quarter operating expenses were $254,000,000 near the midpoint of our guidance. We remain committed to managing our OpEx carefully as we balance investing for growth with driving profitability. First quarter operating income was $189,000,000 with an operating margin of 20.2%. This results the strong revenue and gross margin that I highlighted. First quarter adjusted EBITDA was two thirty six million dollars and at the high end of our expectations, an adjusted EBITDA margin of 25.2%.

Net interest expenses was $45,000,000 just below our guidance of 46,000,000 The first quarter effective tax rate was 19.9%, which was lower than our guidance of 22%. First quarter net earnings were $116,000,000 or $1.71 per diluted share, and above the high end of our guidance, reflecting the strong operating performance and lower income tax rates. First quarter free cash flow remained strong at $123,000,000 which is over 100% of our net earnings and 13% of revenue. We invested $18,000,000 in our capital expenditures in the quarter or slightly under 2% of revenue. We expect full year CapEx to fall within 4% to 5% of revenue.

We closed the quarter with approximately $1,300,000,000 of liquidity comprised of cash and cash equivalents of $655,000,000 and our undrawn revolving credit facility of $675,000,000 As we mentioned in our last earnings call in January 2025, we made a voluntary principal prepayment of $100,000,000 in connection with the repricing of our term loans, which reduced our credit spreads by 25 basis points. We exited the quarter with a gross debt of $4,600,000,000 and a net leverage ratio of 4.2 times based on our trailing twelve month adjusted EBITDA of $933,000,000 Our net leverage ratio improved slightly from the end of prior quarter, reflecting our strong year over year adjusted EBITDA results. Also in the quarter, we repurchased approximately $05,000,000 shares under our existing share repurchase program. The repurchase was accretive and is expected to offset full year stock compensation dilution. In addition expect to make another voluntary prepayment on our term loan in the current quarter.

We remain focused on executing on our long term capital allocation priorities of investing in organic growth opportunities and reducing our leverage through principal prepayments and working with our banking partners to reduce our interest expenses as market opportunities arise. Finally, during the quarter, we paid a dividend of $0.22 per share or $15,000,000 We are very pleased with our performance in the quarter. The fundamentals of our business remain strong. At our current cost structure, we expect significant improvements in cash generation as the demand environment improves, which will allow us to accelerate our deleveraging efforts even further. Let me now turn to our second quarter outlook.

The guidance we are providing represents our best estimates based on the dynamic environment in which we are operating. We expect revenue of $925,000,000 plus or minus $40,000,000 reflecting our view that underlying demand remains stable despite the trade related uncertainties. We believe our technology is integral to our customers’ success, and we are designed into many of the advanced applications our product support. By end market, we expect semiconductor revenue to be $415,000,000 plus or minus 15,000,000 Revenue from our electronics and packaging market is expected to be $240,000,000 plus or minus $10,000,000 and revenue from our specialty industrial market is expected to be $270,000,000 plus or minus 15,000,000 This guidance reflects relative stability in our business, with the exception of slight downtick in flex PCB drilling equipment following the exceptional first quarter results. We are guiding gross margin of 46.5% plus or minus 100 basis points.

The guidance incorporates expectations of a certain higher near term cost related to tariffs. Our current estimate is that tariffs could be up to 100 basis points. We will remain agile in light of the fluid trade and tariff environment to optimize our performance as we implement cost mitigation strategies. We expect second quarter operating expenses of $252,000,000 plus or minus $5,000,000 and adjusted EBITDA of $216,000,000 plus or minus $23,000,000 We expect tax rates of approximately 18% in the second quarter. Based on the progress we have made on our ongoing tax planning efforts, we now expect our full year tax rate to be in the range of 18% to 20%.

We expect second quarter net earnings per diluted share of $1.56 plus or minus $0.28 This includes our estimated impact of incremental tariff costs. We are pleased with the demand trends we are seeing in key areas of our business, and the overall encouraging start to the year. Our execution has remained strong, and we have a long standing track record of managing through uncertainty. We remain confident in our position as a key provider of enabling technologies to our customers across the electronics ecosystem and in our ability to help them solve their most complex challenges. With that operator, please open the call for Q and A.

Conference Operator: Thank you. At this time, we will conduct a question and answer session. As a reminder, to ask a question, you will need to press 11 on your telephone and wait for your name to be announced. To withdraw your question, please just press star 11 again. Please stand by while we compile the q and a roster.

Alrighty. Our first question today comes from the line of Steve Barger of KeyBanc Capital Markets. Your line is now open.

Steve Barger, Analyst, KeyBanc Capital Markets: Hey. Thanks. Good morning. John, you said system upgrades for memory tools have increased. Does it feel like that trend has some momentum?

And can you talk about size and timing of what that could look like?

John Lee, President and Chief Executive Officer, MKS Instruments: Yeah, good morning, Steve. I would say this, two things. One is that the inventory burn of our inventory for the NAND market looks like it’s normalized, so that’s one factor. But we are seeing the upgrades for NAND, and that’s really where we were mentioning about the improving semiconductor market. In terms of outlook, we kind of expect more upgrades to continue, but certainly that can vary.

And we can see a quarter out a little more. And I think really it’s gonna depend on the customers, the NAND customers and what their plans are. But for right now, we’re pretty happy with the improvement in NAND year over year and the fact that our inventory has now normalized.

Steve Barger, Analyst, KeyBanc Capital Markets: And just in terms of overall size, like I know you’re incumbent on a lot of the machines that are out there. Is there any way to gauge what the size of it could be for upgrades?

John Lee, President and Chief Executive Officer, MKS Instruments: Well, I think the good thing is that upgrades means that you can only upgrade what’s out there, the installed base, and that is obviously one large customer of ours, and all of that’s RF power. It’s hard to gauge the size of that, of course, we know the install base, but it really will depend on which customers are upgrading. Certainly one customer has said they see a lot of these customers planning on upgrades, but I think they’re probably going to have the best visibility.

Steve Barger, Analyst, KeyBanc Capital Markets: Got it. And then for my follow-up, really great to hear about momentum for the chemistry equipment solutions. Can you frame up what customers are telling you about two half visibility or what your second half visibility is there and maybe timing of installation and how that results or flows through to chemistry?

John Lee, President and Chief Executive Officer, MKS Instruments: Sure. The chemistry equipment bookings and now the revenue, it started about this is the third quarter of those increased bookings there. We’ve talked about in the past, this is tied to HDI and MLB for AI. So artificial intelligence is driving a lot of these new equipment bookings. We see it steady right now, and of course the bookings that occurred a quarter ago are going in three quarters ago are going in now.

Last quarter, we will go in next quarter. So that’s the kind of lead time you can expect. This quarter, we also saw continued strength there. And also, as you know, we have a very, very high attach rate of our chemistry to that equipment, and it portends a very good future for that chemistry revenue. Now, of course, chemistry revenue is determined by market demand in the end, but when we start with our equipment, it’s certainly beneficial for MKS.

Steve Barger, Analyst, KeyBanc Capital Markets: Yeah, thanks. Sounds promising. I’ll pass it along.

Matthew Frisco, Analyst, Cantor Fitzgerald: Thanks, Steve.

Conference Operator: Thank you. Our next question comes from the line of Shane Brett of Morgan Stanley. Your line is now open.

Shane Brett, Analyst, Morgan Stanley: Thank you for allowing me to ask a question. So my first question is on tariffs. So you mentioned the tariffs will have an impact of 100 basis points on gross margins. Could you talk about how you and your customers are looking to mitigate or offset the impact? And have you seen any change to customer order patterns from tariffs?

I’m asking really in the context of whether you see any signs of pull

Michael Mani, Analyst, Bank of America Securities: in like activities. Thank you.

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: Oh hi Shane, this is Ram, I’ll take that. We are very closely engaged both with our customers and suppliers to find the best solution. In addition to that, as you know, we have global manufacturing and multi site manufacturing capabilities with a very resilient supply chain. So those are our mitigation actions that we are looking at. As you know, the situation is still very fluid, and we’re looking at a broad array of mitigation plans, including selective commercial actions when necessary.

And on your question on the top line, so far we haven’t seen any impact to top line from the tariffs.

John Lee, President and Chief Executive Officer, MKS Instruments: Shane, this is Jen. I would clarify too. We incorporated the effective tariffs on our gross margin. We did say that that could be up to one basis points. We didn’t say we incorporated that whole amount in, so I just want to make sure that was clear to everyone.

Shane Brett, Analyst, Morgan Stanley: Got it. Thank you for the clarification. And some of follow-up is on this kind of a big picture question, but is there any preliminary outlook on the second half? And sort of how has the stronger than expected first half possibly impacted your outlook maybe three months ago?

John Lee, President and Chief Executive Officer, MKS Instruments: Yeah. You know, I think we were happy with our first half performance in certainly in our semi market as well as our E and P markets. When you take our guidance for Q2 and add it to our results for Q1, you can see double digit increases year over year in semi as well as even in E and P. So we’re really happy with those developments. I think your question is what will happen in the second half?

I think in general if all things are equal, we would kind of be happy with a stable demand and potentially increasing demand in those markets. I think the biggest issue now is what will happen with the macroeconomic issues because of tariffs. And so that puts a little more uncertainty into it. But if everything else were the same, we would certainly be happy with this pockets of improvements in our markets and then the year over year improvements in our markets.

Shane Brett, Analyst, Morgan Stanley: Got it. Thanks very much.

John Lee, President and Chief Executive Officer, MKS Instruments: Thanks, Shane.

Conference Operator: Thank you. Our next question comes from the line of Krish Sankar of Cowen and Company. Your line is now open.

Krish Sankar, Analyst, Cowen and Company: Yeah, hi. Thanks for taking my question. I have two of them. First one, John, you mentioned about NAND upgrades, etcetera, all the strength there. Is that a function of just the overall industry upgrades?

Or is your RF power supply share gains helping incrementally? I’m just trying to figure out, has any share gains helped you, is it just more the industry cyclicality right now? And then I have a follow-up.

John Lee, President and Chief Executive Officer, MKS Instruments: Yeah. Would say this, Krish. The upgrades are picking up, that’s the real driver, as well as the fact that our inventory is burned off. I don’t know how you gain more share when you’re 100%, so I’m not sure that question is relevant at this point. But we know we are 100% market share.

Krish Sankar, Analyst, Cowen and Company: This is the RF side. Do you any traction on the pulse DC side?

John Lee, President and Chief Executive Officer, MKS Instruments: Yeah, I think we’ve talked in the past. Pulse DC is something we work on as well, and we’re engaged with all the major players in pulse DC. Pulse DC is certainly something that may happen in volume production, but right now it has not. So we’re working on that with customers. I think depending on the customer and the applications, some may adopt it, some may not.

Krish Sankar, Analyst, Cowen and Company: Got it. Got it. And then just as a follow-up, John, if you go back three months ago, a lot of your legacy AtriTech business is leveraged to smartphones and the review that smartphones will recover in the back half. Now that seems to have been pushed into next year. I’m just kind of curious, does that change the dynamics on how we look into your second half for the AdriTech business?

Or is it too early to make that call?

John Lee, President and Chief Executive Officer, MKS Instruments: I would make a couple comments on that, Krish. You know, we actually saw a little bit of improvement in our Aditech business related to smartphone builds and even little PCs. Not not a lot. Right? But you can see that in the year over year numbers in our chemistry revenue.

Thinking Q1 of twenty twenty five, chemistry organic growth was 8% over Q1 of last year. So we’re seeing some of that. A lot of it also is driven by AI, but to your point, the cyclicality of the consumer product cycle is typical, that Q1 is the lowest for chemistry revenue, Q2 starts accelerating, Q3 is the peak, and then Q4 depends, right, depending on the demand. So I think we still are expecting that kind of pattern for the consumer markets related part of our chemistry business.

Krish Sankar, Analyst, Cowen and Company: Got you. Thanks a lot, John. Thank you.

Shane Brett, Analyst, Morgan Stanley: Thanks, Krish.

Conference Operator: Thank you. Next question comes from the line of Jim Ricchiuti of Needham and Company. Your line is open. Thanks. Good morning.

Jim Ricchiuti, Analyst, Needham and Company: John, what do you think drove the pull forward on the flex drilling side of the business? Any anticipation of tariffs? Or do you think it was just some real underlying demand? I mean, it sounded like you were seeing some positive signs, at least you alluded to in the last quarterly call.

John Lee, President and Chief Executive Officer, MKS Instruments: Yeah, that’s right, Jim. As far as we could tell, it’s really just demand was needed a little earlier than what we typically see in the cycle. You’ve covered us a long time, you know that cycle. It wasn’t because of tariffs as far as we could tell, it was just a demand pull in because our customers needed it. So really not tariff related.

Jim Ricchiuti, Analyst, Needham and Company: And did that include demand also as it relates to HCI applications in that area for drilling?

John Lee, President and Chief Executive Officer, MKS Instruments: Sorry, you broke up a

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: little bit, Jim. Could you repeat that?

Jim Ricchiuti, Analyst, Needham and Company: Yeah, John, I just wanted to know if you’re seeing how satisfied you are with the progress you’re seeing in the HDI drilling portion of the business.

John Lee, President and Chief Executive Officer, MKS Instruments: Right, yes. We mentioned again that low Earth orbit applications continue to grow. As you know, more and more customers are getting into that market and being production tool record is very helpful there. I think in general the HDI drilling market still remains a little muted in terms of CapEx. But we have several design wins throughout the year, and so we’re still very happy with the progress there.

I think the point I would make about the LEO, as we said in our prepared remarks, is that’s confirmation for us that the tool we make, some customers definitely think it’s very much something that is competitive and maybe differentiating from a cost of ownership standpoint.

Jim Ricchiuti, Analyst, Needham and Company: Got it. And just one quick follow-up. I’m wondering how you’re thinking about mitigation actions as it relates to gross margins, the headwind you’re seeing if we look out to the second half. Do you anticipate having this behind you? I know there’s it could be as much as 100 basis points in Q2, but how are you thinking about it in the back half?

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: Hi Jim, this is Ram. Me start by saying that we are very pleased with the continued strength in our gross margin. Our gross margin has remained well above 47% for about five quarters now. So the fundamentals of our business still remain very strong. As you know, this is a very uncertain time, and we are working through mitigation actions, so we are watching the new cycle and the developments as they come.

One thing I can tell you is that we are committed to a 47 plus percent gross margin in the long term.

Jim Ricchiuti, Analyst, Needham and Company: Okay, thank you.

John Lee, President and Chief Executive Officer, MKS Instruments: Thanks Jim.

Conference Operator: Thank you. Our next question comes from the line of Vivek Arya of Bank of America Securities. Your line is now open.

Michael Mani, Analyst, Bank of America Securities: Hi, this is Michael Mani on for Vivek Arya. Thanks so much for taking our questions. I just wanted to dive a little more into the specific pain points you’re seeing with regards to tariffs. So exactly which product areas, which segments are seeing the most impacted? Could you give us a sense of I know there’s a significant manufacturing presence in China.

I mean, how much of that, you know, is being exported back to The US? Is it largely serving domestic China customers? And then, you know, conversely, how much of what’s, what you produce in The US is being sent to China? Thank you.

John Lee, President and Chief Executive Officer, MKS Instruments: Yeah, Michael, thanks for the question. So I think the short answer is everything is occurring that you just called out, and we’re trying to mitigate all of that. We do have footprints in China. A lot of it is China for China, certainly in our chemistry business. So I would say in the chemistry business, there’s very minimal impact from tariffs because of that localization.

Most of the issue is coming from the vacuum side because we do have some factories there that ship worldwide. And so this is the mitigation work we’re doing now is to minimize that. Some of it does come back to The United States, a lot of it does not. And we’re trying to work with our customers to try to minimize that. We also have, as Ram said, factories all over the world.

And so while not every factory makes everything, longer term we can also make those kinds of changes. And so to Jim Ricchiuti’s earlier point, I think there’s an impact from tariffs in the short term. And that’s why we are confident that longer term, if the tariffs stay the way they are, we would be able to have mitigation actions so that we can commit to that 47% plus gross margin long term.

Michael Mani, Analyst, Bank of America Securities: Great, thank you. And for my follow-up, just want a little more medium term about the recovery you’re seeing in semi market here. So if I look at where the business is running relative to maybe the peak in ’22, you’re down around 20%, and I know that last peak, you know, included some customers you might have not been able to ship to. Obviously, that was, the peak of the the last NAND cycle. So as we think about getting back to that peak, over the medium term, would that, you know, would that be would that be would you need would you need a recovery in the NAND market to get back there, or can the foundry and logic wins and, progress in metrology, lithography, these other places, help you get back to the peak?

Especially because I know with, with the NAND upcycle you’re seeing, since a lot of that’s upgrade driven, while that’s still beneficial to you, might not be as beneficial as greenfield ads. So how should we think about getting back to your former run rates? Thank you.

John Lee, President and Chief Executive Officer, MKS Instruments: Michael, I would say that we look at the wafer fab equipment market as a totality, and as we’ve talked about in the past, MKS is addressing 85% of WFE. And then to your point, there are subsegments of it, some driven by NAND, some driven by logic and DRAM. And while we have had that headwind of not being able to ship to many of our previous customers in China, and our non US competitors are, that’s a headwind to market share just by math. We have taken the actions and controlling things we can, which is to double down on world class optics and push the lithography metrology inspection, continuing to push share gains wherever we can. And I think then, of course, the natural growth of the wafer fab equipment market will also help us get back to that peak.

But to your point, I think NAND won’t ever get back to that peak, because that was quite a large peak. But other things can grow. And so if you think about what people are talking about today, gate all around and backside power, a lot of that is depth etch centric, and that’s still where we’re more levered versus lithography metrology inspection. I think a lot of the other things that are going on like packaging or putting chips together or wafers together, that drives vacuum processes as well. And so you’ve seen some of our customers talk about that.

And then I would pivot more importantly is that with advanced packaging, that’s really another area for growth where MKS is uniquely positioned to enjoy both the packaging growth as well as the chip growth.

Michael Mani, Analyst, Bank of America Securities: Thanks so much for the color.

Conference Operator: Thank you. Our next question comes from the line of Matthew Frisco of Cantor Fitzgerald. Your line is now open.

Matthew Frisco, Analyst, Cantor Fitzgerald: Hey, guys. Thanks for taking the question. I wanted to start on maybe the photonics side of the business and just what type of traction you’re seeing there today? Any changes over the last three months? And maybe how are you thinking about the ramp of the major wins here that you previously announced?

Anything around timing or impact to

Michael Mani, Analyst, Bank of America Securities: the model would be helpful.

John Lee, President and Chief Executive Officer, MKS Instruments: Yeah, good morning, Matt. And I think for photonics, you’re talking about the semi side of it or in general, broader photonics business?

Matthew Frisco, Analyst, Cantor Fitzgerald: Talking about the semi side specifically.

John Lee, President and Chief Executive Officer, MKS Instruments: Yeah, so I would say that the design wins that we talked about in the past, those remain highly engaged technical engagements with our customers. We’re continuing to work on new things as well with those customers. We’re not immune to the cycles for even lithography metrology inspection, but the lead times are much longer, so those cycles are a little more muted. And you can see that in 2024, that segment of WFE for us was $300,000,000 which is a much faster growth than the market. I would say this, some of the things that we have designed in, we talked about in the past, some complex integrated subsystems that only MKS can do because of our portfolio, those are going into production on some of the most advanced lithography, metrology, and spectra tools.

So we’re seeing that what we’re doing is incredibly critical to some of the most incredibly critical tools in a FAB. So we’re really pretty pleased with that momentum there.

Matthew Frisco, Analyst, Cantor Fitzgerald: Helpful. And then just a quick follow-up. How should we think about your ability and willingness to continue paying down debt within the uncertain backdrop? Maybe if you can update us on minimum cash balance and the current prepayment strategy. I know normally when you guys report, you’ve already got some repayment for the quarter in the books.

I haven’t seen that yet. So what are we thinking for kind of magnitude this quarter and moving forward? Thanks.

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: Hi, Matt. In general, you can expect a similar pattern as we did last year with regard to our debt pay down. As we said in the prepared remarks, we will do a prepayment in Q2. Our capital allocation strategy has not changed. After we invest in CapEx and in the business, our priority remains repayment of debt.

And we are very confident that we can operate. Our liquidity is very strong, and at these levels of cash, we are very confident, given the systems and cash poolings we have put in place, we have a very flexible system to apply cash and need not maintain, there’s no need to maintain the levels of cash we did in the past. So at these levels, it frees up a lot more cash for applying towards our debt. As we mentioned on the call, in the beginning of the quarter, we found an opportunity to buy back some stock, because we have a lot of confidence in our business. It was a modest amount, it was accretive to, and also helped offset the dilution in the year.

But that does not reflect any shift in our capital allocation strategy. We are committed to paying down debt one more prepayment in Q2, and that focus will continue.

John Lee, President and Chief Executive Officer, MKS Instruments: Helpful. Thank you. Thanks, Matt.

Conference Operator: Thank you. Our next question comes from the line of Melissa Weathers of Deutsche Bank. Your line is now open.

Paratosh Misra, Vice President of Investor Relations, MKS Instruments0: Hi there. Thank you for letting me ask a question. I guess for my first one on the specialty industrial business, I know there’s a couple of moving pieces. You guys called out automotive being a bit worse in this most recent quarter. I guess could you talk a little bit more about what you’re seeing in that segment?

What are the moving pieces? What kind of growth rate or what trends should we be expecting in 2025 just because it is so chunky and there are some differing trends by different end markets?

John Lee, President and Chief Executive Officer, MKS Instruments: Good morning, Alyssa, thanks for the question. Yes, we called out general industrial as

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: well as

John Lee, President and Chief Executive Officer, MKS Instruments: automotive being muted, and obviously down year over year, and causing our specialty industrial markets to be down year over year, and quarter over quarter was actually a little better than we thought, but year over year it’s definitely down. I would say this, even as late as like yesterday, sorry, a forecast for light vehicle production changed, went down. So automotive is really something that is quite muted. And then I think with the tariff environment, that just added just a tremendous amount of more uncertainty to it. You’ve seen many automotive companies come out with huge numbers of profitability impact because of the tariffs.

Obviously you’ve seen a lot of folks buy before the tariffs, and now they’re not gonna buy. So I think it’s a very volatile and uncertain time for the automotive industry, and that’s certainly gonna affect our customers who are down the supply chain. So we don’t believe there’s any share loss. Think it’s really just a market driven macro effect. Could it go worse?

It could, right? I think that’s the part of the tariffs that could make it worse. And of course, if we get relief from tariffs or some deal is made, then of course that would put the market back into maybe a more normal seasonality. So just a lot of uncertainty right now, Melissa, and I don’t know if we could really tell you more than that.

Paratosh Misra, Vice President of Investor Relations, MKS Instruments0: Got it. Well, thank you for attempting to share your crystal ball with us, because we all have the same questions. And then as my follow-up on the I want to go back to the chemistries side of the business, specifically within E and P. You walked us through the seasonality in a prior question, which is really helpful. Can you just help us just remind us how we should think about, like, the the growth rate of that business, like, beyond just seasonality?

But, like, is that a GDP plus type grower? Is there any, like, content applications? I know AI is a nice driver, and you’ve got the equipment sales that are getting pulled in. How do we think about the growth rate of that chemistries piece in E and P beyond just seasonality?

John Lee, President and Chief Executive Officer, MKS Instruments: Yeah, that’s a great question. I think when you look at the entire PCB industry and the chemistry that goes with it, we have said in our long term model that it’s GDP plus 300 basis points. Now, it’s broken up into three segments, the PCB industry. The very difficult to high end packaged substrate segment, that’s the PCB right underneath the chips, That is growing at high single digits and maybe even double digits now, low double digits. So that CAGR is an exciting area for growth.

And then HDI, that middle layer of technology, is really driven more by things like smartphones, and that has been a little muted, but we kind of thought mid single digit CAGR. And then MLB, the lower end, we thought was GDP. And I think what we’re seeing is that AI is actually even adding some incremental growth to MLB and HDI, as well as the package substrate. But overall I think we kind of still subscribe to this GDP plus 300 basis points that we talked about three years ago. But it’s incrementally a little better, just like AI has driven chips, the trillion dollar target in 02/1930 for chip sales, AI has kind of added incremental positivity to that.

I think it’s also doing the same for the PCB industry.

Paratosh Misra, Vice President of Investor Relations, MKS Instruments0: Thank you.

Michael Mani, Analyst, Bank of America Securities: Thank you.

Conference Operator: All right, thank you. Our next question comes from the line of David Liu of Mizuho. I hope I pronounced that right. Your line is now open.

Paratosh Misra, Vice President of Investor Relations, MKS Instruments1: Hi. Thanks for letting me ask a question. I’m on for Vijay here. Maybe another on second half. I know a lot of customers and suppliers are pulling their full year order outlook and not providing forecast.

But I was wondering on the other side, where are you guys seeing customers maybe more strong and bullish maintaining that full year outlook? And where, is MKSI benefiting there? And then also how that drives the specifically maybe how the semiconductor business still growing above 200 basis points above WFE? Thank you.

John Lee, President and Chief Executive Officer, MKS Instruments: Hey, David. Thanks for the question. I guess the way we would think about it is we’re very engaged with all of our semi customers for sure, as well as E and P customers. And in general, I think the DepETCH customers in semi are relatively more positive, I think, for the second half. There’s puts and takes, right?

There’s some constraints because of restrictions, and then there’s some backside power and gate all around that are tailwinds. So there’s some puts and takes, but in general I think most people are pretty positive on the year over year growth, and certainly many analysts think that 2025 is a slight growth year relative to 2024. Now, of course, we don’t know if that’s going to work out or not, but that is what we’re hearing from our customers. And of course, that is what they’re ordering. That’s the order pattern we’re seeing.

With respect to packaging, we’ve talked about these equipment orders for three quarters in a row now tied to AI applications, and these equipment orders are for MLB and HDI, very thick MLB layers, many layers. And the reason I think we’re getting a lot of those equipment orders is, well, in the equipment industry, first chemistry, our equipment is on the high end. We do the most difficult types of equipment. And so when you’re doing the most difficult kinds of packaging, you need our equipment. So that’s why I think we’re seeing a little tailwind there.

So those customers are very bullish, obviously. They are investing very quickly, they’re pulling as fast as they can that they can put that capacity and so they can either grow their share or compete for share to support the AI industry.

Paratosh Misra, Vice President of Investor Relations, MKS Instruments1: Thanks. And do you get us some of you on 25 or 26 WFE globally? Thanks. That’s it.

John Lee, President and Chief Executive Officer, MKS Instruments: Yeah. As I said many times in the past, if I could do that, I don’t have to do this job. But I would say this, we always turn it back to longer term. The wafer fab equipment industry is a great neighborhood that’s getting better, and that’s because it’s driven by, continued need for more semiconductors, more complex semiconductors that require more steps and more equipment. You can see CapEx intensity trending over the decades in a direction where it’s now maybe in that 15% range in terms of CapEx intensity.

And so at a trillion dollar chip industry, that’s $150,000,000,000 WFE, which is 50% more than today. So I think longer term trend, it’s a great neighborhood. We’re incredibly proud of the fact that we are the market leader in terms of addressing 85% of every piece of equipment out there.

Paratosh Misra, Vice President of Investor Relations, MKS Instruments1: Thank you.

John Lee, President and Chief Executive Officer, MKS Instruments: Thank you.

Conference Operator: Our next question comes from the line of Steve Barger of KeyBanc Capital Markets. Your line is now open.

Steve Barger, Analyst, KeyBanc Capital Markets: For the follow-up. Dollars 123,000,000 in free cash flow is the best first quarter I can see in my model. And it looks like working cap was a smaller use than normal. Is that just timing? And do you expect a normal kind of low double digit or low teens free cash flow margin this year?

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: Well, can comment on the Q1 cash flow, Steve. The improvements we have made to working capital through last year clearly has helped. We’re able to operate at a much better level now. In addition to that, we also had a strong top line and good margin year. CapEx was a little light in Q1, but that’s purely timing, that will come back up.

But we do see, we are very happy with the strength of our cash flow, and where we

Steve Barger, Analyst, KeyBanc Capital Markets: are I guess, do you see anything unusual for the remainder of the year that we should be thinking about, or would this be a kind of a normal year?

John Lee, President and Chief Executive Officer, MKS Instruments: In the context of whatever

Steve Barger, Analyst, KeyBanc Capital Markets: the top line does.

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: That’s correct, that’s what I was gonna say. It really goes back to the top line discussion, right? Outside that, we don’t see anything abnormal this year other than CapEx ramp up in the coming quarters.

Steve Barger, Analyst, KeyBanc Capital Markets: Got it. Know your primary focus So,

John Lee, President and Chief Executive Officer, MKS Instruments: I gonna also comment that we did guide a little bit of an incremental improvement in our tax rates too, which

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: is helpful as well. That’s Yep.

Steve Barger, Analyst, KeyBanc Capital Markets: So I know your primary focus is debt reduction, as it should be. But with your strong free cash flow and the recent downside volatility in the stock, why not be opportunistic when shares are trading at sizable discount to however you calculate intrinsic value? We did that. It was to offset dilution, but would you remain

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: and it’s something which we look at, and it’s a fair question, it’s something which we look at, and when it’s accretive, we certainly take that into consideration. We still have about a little under 30,000,000 left from our existing authorization. So it’s an evaluation that we do internally. Debt repayment is our strengthening the balance sheet is our primary focus, but it’s an analysis we do internally. Yes, Steve, I

John Lee, President and Chief Executive Officer, MKS Instruments: would also add that debt reduction through pay down is one avenue. Certainly we’re always looking at portfolio and staying focused on our main markets. And so it’s strategic planning season. It’s the time where we refocus on that again. And so I think there are other ways to, of course, accelerate a debt repayment.

And we’re looking at all those ways.

Steve Barger, Analyst, KeyBanc Capital Markets: Good. Well, yeah, I would just urge the board to really consider that as an option, given some of the volatility we’ve seen. Thanks.

Ram Mayamparat, Executive Vice President, Chief Financial Officer and Treasurer, MKS Instruments: Thanks, Steve.

Conference Operator: Thank you. As a reminder, if you do have any questions, please press 11 on your telephone and wait for your name to be announced. Again, to withdraw your question, just please press 11 again. Please stand by for any additional questions. So I am showing no further questions at this time.

I will go ahead, and I will turn it back to Paretosh Misra for closing remarks.

Paratosh Misra, Vice President of Investor Relations, MKS Instruments: Thank you all for joining us today and for your interest in MKS. Travis, you may close the call, please.

Conference Operator: Thank you for your participation in today’s conference. This does conclude the program. You may now disconnect.

This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.

Latest comments

Risk Disclosure: Trading in financial instruments and/or cryptocurrencies involves high risks including the risk of losing some, or all, of your investment amount, and may not be suitable for all investors. Prices of cryptocurrencies are extremely volatile and may be affected by external factors such as financial, regulatory or political events. Trading on margin increases the financial risks.
Before deciding to trade in financial instrument or cryptocurrencies you should be fully informed of the risks and costs associated with trading the financial markets, carefully consider your investment objectives, level of experience, and risk appetite, and seek professional advice where needed.
Fusion Media would like to remind you that the data contained in this website is not necessarily real-time nor accurate. The data and prices on the website are not necessarily provided by any market or exchange, but may be provided by market makers, and so prices may not be accurate and may differ from the actual price at any given market, meaning prices are indicative and not appropriate for trading purposes. Fusion Media and any provider of the data contained in this website will not accept liability for any loss or damage as a result of your trading, or your reliance on the information contained within this website.
It is prohibited to use, store, reproduce, display, modify, transmit or distribute the data contained in this website without the explicit prior written permission of Fusion Media and/or the data provider. All intellectual property rights are reserved by the providers and/or the exchange providing the data contained in this website.
Fusion Media may be compensated by the advertisers that appear on the website, based on your interaction with the advertisements or advertisers
© 2007-2025 - Fusion Media Limited. All Rights Reserved.