Earnings call transcript: Proto Labs beats revenue expectations in Q1 2025

Proto Labs Inc. (PRLB) reported its first-quarter 2025 earnings, slightly missing EPS forecasts but exceeding revenue expectations. The company posted an earnings per share (EPS) of $0.33, just under the forecasted $0.34, while revenue reached $126.2 million, surpassing the anticipated $124.51 million. In pre-market trading, Proto Labs’ stock rose 3.63% to $37.10, reflecting investor optimism despite the minor EPS miss.

Key Takeaways

• Proto Labs’ revenue exceeded forecasts, reaching $126.2 million.
• EPS was slightly below expectations at $0.33 compared to the forecast of $0.34.
• The stock price increased by 3.63% in pre-market trading.
• Strong performance noted in aerospace and defense sectors.
• Continued investment in manufacturing capabilities.

Company Performance

Proto Labs demonstrated resilience in Q1 2025, with revenue reaching the upper end of its guidance range despite a 1% year-over-year decline in constant currencies. The company’s focus on expanding its production capabilities and its strong presence in the aerospace and defense sectors contributed to its robust performance. With a strong Altman Z-Score of 9.41 and zero debt on its balance sheet, Proto Labs maintains exceptional financial health. In a challenging manufacturing sector, Proto Labs’ unique hybrid manufacturing model and strategic investments have positioned it favorably against competitors.

Financial Highlights

• Revenue: $126.2 million, down 1% year-over-year
• Non-GAAP EPS: $0.33
• Non-GAAP gross margin: 44.8%, up 140 basis points sequentially
• Cash from operations: $18.4 million
• Stock repurchases: $20.9 million, 122% of free cash flow
• Cash and investments: $116.3 million, zero debt

Earnings vs. Forecast

Proto Labs posted an EPS of $0.33, slightly below the forecasted $0.34, marking a minor miss of approximately 2.94%. However, the company’s revenue of $126.2 million surpassed expectations of $124.51 million, reflecting a positive surprise of about 1.36%. This performance is consistent with Proto Labs’ historical trend of meeting or exceeding revenue projections, although the EPS miss is a deviation from its usual performance.

Market Reaction

Following the earnings release, Proto Labs’ stock price rose by 3.63% in pre-market trading, reaching $37.10. This increase reflects investor confidence in the company’s revenue performance and strategic direction. The stock’s movement is notable given its position within a 52-week range of $25.76 to $46.73, indicating a positive market sentiment despite broader challenges in the manufacturing sector. InvestingPro data shows the stock has delivered a 15% return over the past year, though its P/E ratio of 54.3x suggests a premium valuation. Get access to detailed valuation metrics and comprehensive analysis through InvestingPro’s exclusive Research Reports.

Outlook & Guidance

Proto Labs provided guidance for Q2 2025, projecting revenue between $124 million and $132 million and non-GAAP EPS between $0.30 and $0.38. The company plans to continue investing in its production capabilities and expects sequential growth. According to InvestingPro analysis, net income is expected to grow this year, though 4 analysts have recently revised their earnings estimates downward. The focus remains on increasing the number of customers using its combined manufacturing offer, supported by the company’s strong current ratio of 3.66x.

Executive Commentary

CEO Rob Bedore emphasized Proto Labs’ leadership in on-demand manufacturing, stating, "We pioneered on-demand manufacturing over twenty-five years ago, and we remain the fastest in the world." CFO Dan Schumacher highlighted the company’s strategic position, noting, "We are well positioned both from the number of different fulfillment options we can offer customers as well as our financial strength."

Risks and Challenges

• Macroeconomic headwinds affecting product launches.
• Tariff policies creating supply chain uncertainty.
• Contraction in the manufacturing sector.
• Potential challenges in maintaining margin improvements.
• Need to adapt to evolving customer demands and market conditions.

Q&A

During the earnings call, analysts inquired about the factors driving gross margin improvements, which were attributed to increased factory volumes. Questions also focused on the company’s network fulfillment capabilities and its strategy to mitigate tariff impacts through a flexible manufacturing network. Proto Labs’ emphasis on three-dimensional printing remains more prototype-focused, with future expansions anticipated.

Full transcript - Proto Labs Inc (PRLB) Q1 2025:

Conference Operator: As a reminder, this conference is being recorded. It is now my pleasure to introduce your host, Jason Frankman, Vice President and Corporate Controller.

Thank you. You may begin.

Jason Frankman, Vice President and Corporate Controller, Proto Labs: Thank you, Shamali. Good morning, everyone, and welcome to Proto Labs’ first quarter twenty twenty five earnings conference call. I’m joined today by Rob Bedore, president and chief executive officer, and Dan Schumacher, Chief Financial Officer. This morning, Proto Labs issued a press release announcing its financial results for the first quarter ended 03/31/2025. The release is available on the company’s website.

In addition, a prepared slide presentation is available online at the web address provided in our press release. Our discussion today will include statements relating to future performance and expectations that are or may be considered forward looking statements and subject to many risks and uncertainties that could cause actual results to differ materially from expectations. Please refer to our earnings press release and recent SEC filings, including our annual report on Form 10 ks, for information on certain risks that could cause actual outcomes to differ materially and adversely from any forward looking statements made today. The results and guidance we will discuss include non GAAP financial measures consistent with our past practice. Please refer to our press release and the accompanying slide presentation at the Investor Relations section of our company website for a complete reconciliation of GAAP to non GAAP results.

Now I’ll turn the call over to Rob Bedore. Rob?

Rob Bedore, President and Chief Executive Officer, Proto Labs: Thanks, Jason. Good morning, everyone, and thank you for joining our first quarter earnings call. We started the year strong, delivering revenue of $126,000,000 near the upper end of our guidance range. Profitability was solid as well, with earnings per share of $0.33 also near the top end of our expectations. We also delivered sequential gross margin expansion and strong free cash flow.

While first quarter revenue was down slightly versus the prior year, amidst macroeconomic headwinds and manufacturing contraction, we remain confident in our strategy and our commitment to driving growth for the full year. Our first quarter performance sets a solid foundation for growth in 2025 and demonstrates our ability to deliver on expectations in a volatile environment, reinforcing the resilience of our model. In addition, free cash flow during the quarter represented 14% of revenue, reflecting continued industry leading profitability. Because we believe in the strength of our model, we have continued to return capital to our shareholders by repurchasing our common stock, as Dan will discuss shortly. Shifting to an update on our strategic priorities, our hybrid model continues to yield positive outcomes and was successful once again.

Customers utilizing our combined offer grew more than 45% over the trailing twelve months, and revenue per customer in Q1 increased by 3% We also continue to make significant progress in our initiatives to drive growth, as outlined last quarter. First, our marketing investments to further establish Proto Labs as a production manufacturer are gaining traction. Our new messaging is resonating within production buyer channels, reinforcing our brand positioning and expanding awareness. At the start of this year, we made an incremental investment in marketing to inform and educate potential customers about our expanded capabilities across the product life cycle.

We have seen our share of voice in the market increase as a result of this new marketing, with over 2,000,000 views of our prototype to production campaign to date. This has led to an increase in searches for Proto Labs, as potential customers look to source their custom on demand manufacturing. Online searches for Proto Labs are up double digit percentage points versus last year, and this progressively increased each month during the first quarter, so we are seeing accelerated momentum for our production offerings. We will continue to invest in this campaign as we progress through 2025, tailoring to our target industries. Production revenue continued to grow nicely and exceeded our expectations in the first quarter.

We are very pleased with customer engagement of our expanded production capabilities. To illustrate our success in production applications, I’d like to highlight some customer examples in aerospace and defense, one of our target industries. Our speed, extensive domestic manufacturing capabilities, and ability to produce complex, high requirements parts make us an excellent partner to these innovative organizations. We offer ITAR certified parts through both the factory and through the manufacturing partners in the Frodo Labs network, enabling aerospace and defense customers full access to our combined offer. Revenue from these customers has increased very nicely in recent years, in part due to increased end user production orders.

We manufacture flight ready production parts through AS9100 certified facilities, and our metal three d printing service is especially valuable, as customers seek to design and procure durable, lightweight parts. We serve the largest and most advanced companies in this space, including 100% of aerospace and defense companies in the Fortune 500. Organizations like Blue Origin, NASA, and Lockheed Martin have all leveraged production at Proto Labs. In one example, Proto Labs is part of a team supporting Blue Origin’s Blue Moon Mark I. The single launch lunar cargo lander will remain on the moon’s surface, providing safe, reliable and affordable access to the lunar environment.

NASA has said that the Mark-one cargo lander could deliver a scientific payload to the moon’s South Polar Region as soon as this summer. We’ve also had several aero and defense customers qualify our production solution after auditing our manufacturing facilities. These customers, some of which have used our prototyping services for many years, have already placed orders for production parts in injection molding, CNC machining and three d printing. This is a great example of continued growth, driven by existing Proto Labs customers leveraging both prototyping and production. Now transitioning to our second initiative to drive growth, our go to market reorganization.

I am pleased to say that this is yielding positive results. Enhanced sales enablement tools and processes are improving our understanding of customer production needs, enabling us to deliver tailored solutions via team based selling, better serving our customers and driving growth. And third, the optimization of our fulfillment channels to meet customer needs is advancing very well. The closure of our German molding facility has streamlined our global operations as we continue to improve overall efficiency by aligning our manufacturing footprint with our global fulfillment strategy. This decision, which is part of the broader multi year reshaping of our portfolio and began with the closure of our Japan operations in 2022, allows us to better leverage both factory and network capabilities.

We are pleased with the results to date and remain focused on continuing to optimize our manufacturing footprint to better serve our customers globally. Turning to tariffs and strategic positioning. We are closely monitoring the evolving tariff policies and their potential impact on our customers and the broader manufacturing landscape. As we’ve demonstrated, most recently during the COVID-nineteen pandemic, we can adapt faster than anyone to support our customers in times of supply and demand volatility. Speed and agility are central to our operations.

While there is still uncertainty in regard to tariffs, we believe the current situation unfolding is a strong opportunity to drive growth for several reasons. First, our diverse and strategically located global manufacturing footprint provides resilience and flexibility, allowing us to adapt to shifting supply chain dynamics and serve our customers effectively, regardless of geographical shifts. In fact, 90% of our revenue from American customers is already fulfilled by factories in The U. S, through both our digital factories and our network. Our international operations are also highly adaptable.

With manufacturing capabilities spanning multiple countries, we are not overly reliant on any single region, and can and do shift capacity in response to changing demand. This positions us favorably as companies reevaluate sourcing strategies in response to tariff risks. Next, our pricing models are fulfilled, and routing platforms are highly adaptable and driven by artificial intelligence. And finally, we consistently generate strong free cash flow, underscoring the fundamental strength of our business model. This financial stability, which is uncommon in our industry, enables us to invest in growth initiatives and navigate periods of uncertainty.

We are actively reviewing pricing strategies to help offset impacts from tariffs where appropriate, ensuring that we stay competitive while preserving value for customers. The current economic uncertainty is causing customers to be more cautious about demand forecasting, which may extend the timeline for shifting supply chains. But again, we believe this environment favors agile players like us. We pioneered on demand manufacturing over twenty five years ago, and we remain the fastest in the world. This is a vital solution for customers whose demand may be volatile or unclear, allowing them to only order what they need and receive delivery in days, not months.

Before I hand the call over to Dan, I’d like to close with our 2025 priorities. Our primary focus for 2025 remains driving growth in our key indicators, which are increasing the number of customers utilizing our combined offer and increasing revenue per customer. To achieve this, we are, one, leveraging our newly streamlined organizational structure to enhance efficiency and accelerate growth across all areas of our business. Our teams are in place, and they are properly incentivized. Two, we are expanding our production use cases by investing in advanced manufacturing capabilities and refining our go to market strategies to better meet customers where they are, positioning ourselves to capture a larger share of this growing market.

And three, we’re reinforcing our core prototyping business by investing in cutting edge technologies and optimizing lead times, ensuring we maintain our industry leading position. Proto Labs’ unique combination of factory and network enables us to serve customers across product life cycles, from prototyping through production and into end of life. So in closing, we are confident in our position to navigate evolving market dynamics and deliver sustainable growth, while maintaining industry leading profitability and cash flow. Our strategic investments and operational efficiencies position us well to capitalize on emerging opportunities and create long term value for our shareholders. Now I’ll hand it over to Dan to cover the financials.

Dan?

Dan Schumacher, Chief Financial Officer, Proto Labs: Thanks, Rob, and good morning, everyone. I’ll start with a brief overview of our first quarter results, then provide our outlook for the second quarter of twenty twenty five. First quarter revenue came in at $126,200,000 toward the upper end of our guidance range and down 1% year over year in constant currencies. The first quarter last year included one extra ordering day due to leap year. Our revenue result reflects a 4% sequential increase.

Revenue fulfilled through Proto Labs Network was $26,300,000 up 11.5% in constant currencies. US revenue was down 1.2% compared to the prior year. In Europe, revenue was flat compared to the prior year in constant currencies. Turning to revenue by service on a constant currency basis. CNC machine revenue grew 6% year over year, driven by strong performance in production and high requirement CNC parts.

Injection molding revenue declined 7% versus the prior year, mainly due to non recurring larger part orders in the first quarter of twenty twenty four. Injection molding revenue increased 7% as compared to the fourth quarter. ’3 d printing revenue was down 6% year over year as order trends lagged our expectations in late twenty twenty four and early twenty twenty five. And lastly, sheet metal revenue increased 19 over last year, driven by improved offerings and go to market efforts. Moving to margins.

First quarter consolidated non GAAP gross margin increased 140 basis points sequentially to 44.8%, mainly due to higher volume and margin improvements on the factory side. On a year over year basis, gross margin was down 80 basis points, driven by lower volume and a higher mix of network fulfilled revenue. Non GAAP operating expenses increased $3,600,000 sequentially in the most recent quarter, driven primarily by higher incentive compensation, as well as additional investments in demand generation. We discussed these gross investments last quarter, and Rob elaborated on the progress we’ve made. We will continue to monitor returns on these investments and adjust as necessary throughout the year.

Higher incentive comp and demand gen spend was partially offset by lower headcount in the first quarter as we restructured teams as part of the new organizational structure. Non GAAP earnings per share were $0.33 within our guidance range and down $05 sequentially. This sequential decline was primarily driven by increased operating expenses and a higher tax rate. As Rob mentioned, we continue to lead the digital manufacturing industry in terms of cash generation. We generated $18,400,000 in cash from operations during the first quarter, and we returned $20,900,000 to shareholders in the form of repurchases, or 122 percent of free cash flow.

On 03/31/2025, we had $116,300,000 of cash and investments on our balance sheet and zero debt. Our outlook for the second quarter of twenty twenty five is outlined on slide 15. We expect revenue between 124,000,000 and $132,000,000 This guidance represents growth of 2% year over year at the midpoint and incorporates order and revenue trends to date. We expect foreign currency to have a $300,000 favorable impact on revenue compared to the second quarter of twenty twenty four. Moving to earnings guidance.

We anticipate non GAAP add backs in the second quarter to include stock based compensation expense of approximately $4,500,000 and amortization expense of $900,000 We currently estimate a non GAAP effective tax rate between 2527% in the second quarter. In summary, we expect second quarter non GAAP earnings per share between $0.30 and $0.38 That concludes our prepared remarks. Operator, open up for questions.

Conference Operator: Thank you. We will now be conducting a question and answer session. If you would like to ask a question, please press star one on your telephone keypad. A confirmation tone will indicate your line is in the question queue. Our first question comes from the line of Brian Drab with William Blair.

Please proceed with your question.

Brian Drab, Analyst, William Blair: Hi, good morning. Thanks for taking my questions. Thanks, will point out, it seems like maybe the start of a good trend here, you’ve seen the unique customer contacts up sequentially, the revenue per customer up sequentially. So just a couple of things that I mean, the customer count up just modestly sequentially with the moving in the right direction in a tough environment stood out to me. But I wanted to ask first on gross margin, a nice improvement sequentially in gross margin.

Obviously, fourth quarter can be a little soft, but can you just drill into that a little bit more at how sustainable this level of gross margin is? Can you get back to some of these 45s and 46s that we saw in 2024 as we move through 2025?

Dan Schumacher, Chief Financial Officer, Proto Labs: Yeah, thanks for the question, Brian. You know, It’s primarily volume quarter over quarter. And we had a good pickup in volume in our factory, which caused our factory margins to increase quarter over quarter. Our network margins actually were slightly down quarter over quarter. I think we’ve got some challenges usually in the first quarter from a network perspective as it relates to sourcing and Chinese New Year and so forth.

The main driver quarter over quarter is that increase in factory volume and factory margins. As we look at the rest of the year, my guide implies that margins from Q1 to Q2 will be flat to slightly down. That’s really the amount of revenue that we have flowing through network fulfilled versus factory fulfilled. So we expect higher network revenue quarter over quarter. And so that’s going to create a headwind.

That being said, we are driving improvements in margin in both the factory and both the network. I think getting to 45 or some of those higher margins that we saw before, it will be impacted by how much of that volume does go through the network versus what goes through the factory as we look at the rest of the year.

Rob Bedore, President and Chief Executive Officer, Proto Labs: Okay, thanks. Go

Brian Drab, Analyst, William Blair: ahead, Rob.

Rob Bedore, President and Chief Executive Officer, Proto Labs: Yeah. No, sorry. Thank you for your comments on the business and the sequential performance. I’m quite pleased with that 4% sequential performance, and as our guide indicates, we’re seeing continued growth, right, and expect that growth to continue into Q2. We made major changes and a pretty substantial pivot last year in support of customer focus and in support of our production strategy.

And I’m very pleased with the growth that we’re seeing in our production business as a result of this. You know, at that time, we came forward with a number of critical metrics that we’re going to use to measure this, and frankly, they’re all up, right? We’re seeing average order values increase, we’re seeing revenue per customer increase, we’re seeing the number of customers who are buying our combined offer up substantially, and our production revenues are growing. So, you know, I want to just recognize the work of our go to market teams who are out there educating our customers on this. This is our focus, we’re investing behind it.

We’ve got a successful brand campaign that we’ll continue to drive, and I’m very encouraged with how we’re starting this year.

Brian Drab, Analyst, William Blair: Okay. Got it. May maybe, I’ll just ask one more for for now since you guys just gave me a lot of detail on my first question. But, is there anything to be concerned about, related to the hubs network? And I know that it’s a global network obviously, but I think there are quite a few manufacturing partners in China.

Is this is the tariff situation which I know could be a positive driving onshoring and get positive for you in a lot of ways, but is this trade war causing challenges for hubs?

Rob Bedore, President and Chief Executive Officer, Proto Labs: Yeah, thank you for the question. No, we really haven’t seen that. We’ve got a network that is extremely adaptable, right? And so we routinely are able to, and on a real time basis, move work around across the network and redirect orders based on the customer needs, pricing and so forth. And so that flexibility really allows us to adapt very quickly.

In fact, even in a normal year, we see substantial shifts across the network in terms of where we’re sourcing components, and that’s what we’ve been able to do here to adapt to the tariffs. So the network continues to grow, and we’ve been able to be quite flexible and adaptive to mitigate any impact both to our MPs and to our customers during this period. In fact, this is one of the strengths of our model.

Brian Drab, Analyst, William Blair: Okay, thanks. And sorry to slip back to old terminology. I’ll go write down Proto Labs network ten times on a piece of paper. It’s the right name. All right, thanks Brian.

Dan Schumacher, Chief Financial Officer, Proto Labs: Thanks Brian. Thank

Conference Operator: you. Our next question comes from the line of Greg Palm with Craig Hallum Capital Group. Please proceed with your question.

Greg Palm, Analyst, Craig Hallum Capital Group: Yes. Good morning. Thanks for taking the questions and congrats on the quarterly results. You maybe talk a little bit more about what you’re seeing in April specifically just in terms of kind of order growth and customer behavior and specifically the guide implies a lower gross margin. Think, Dan, you mentioned it’s based on a mix of networks.

So you’re seeing a higher proportion of revenue going in the network so far this month or previous month, April?

Dan Schumacher, Chief Financial Officer, Proto Labs: From a trend perspective, we’ve seen orders consistently improve month to month as we’ve gone through the year. I think on the network side, was to start the year softer and had to do more with kind of bigger network orders through Europe. But we’re seeing that begin to overall network fulfilled orders to continue to trend up. And so our guide reflects that. So we just continue to see as we’re going through the year improvement in demand.

Greg Palm, Analyst, Craig Hallum Capital Group: And you talked about the benefits of your offering, comprehensive offering in times like this. I’m curious, do you have any evidence that this current environment is actually providing some kind of tailwind, whether that’s, you know, onboarding of new customers. I mean, I don’t know what kind of metrics you’d look for specifically, but what what are you seeing out there?

Rob Bedore, President and Chief Executive Officer, Proto Labs: Yeah. Sure. Yeah, so as I’m talking to customers, and I talked to several very recently, even this week, they’re, you know, what we’re hearing from them is several things. First of all, excitement around our production offerings, right, and more adoption of those production offerings, right? So this is independent of the macro environment, right?

Remember that they’ve been asking us for these capabilities for years, and now we’re really bringing them to them, and we’re promoting it very aggressively. And so we’ve got these customers who we’re engaging with, they’re used to relying on us for their prototyping, and now we’ve got these production solutions so they can stay with us through their product life cycle, reducing their risk whenever they have to change a supplier, so that makes this more streamlined and more cost effective for them. So they’re very pleased with that and I think that’s, I attribute a lot of our sequential growth and what we’re seeing today to that. That said, in terms of supply chain disruption and tariffs in this environment, we’re definitely hearing them talk about looking at alternatives, right, for their supply chain and diversification around supply chain, and including reshoring to The US as part of that solution. And so we’re having those dialogues and we’re seeing some of them begin that and I see that again as a strong growth opportunity for us.

I mean we stand ready to serve their needs in that way, We’re super adaptive, we’re highly automated, we’re very flexible, and we’ve got tons of scale. And the super majority, right, 90% of our America’s revenue is already fulfilled in The Americas, right, so we have very little tariff exposure from that standpoint.

Greg Palm, Analyst, Craig Hallum Capital Group: Yes, understood. And I guess just kind of going forward, thinking about the network, are you just given some of the initial tariffs, are you thinking about building a greater base, let’s say, here in The U. S? I mean, do you feel like you’ve got the right amount of sort of production partners here? What do you think?

Rob Bedore, President and Chief Executive Officer, Proto Labs: Yes. I’m pleased with our network and the strong manufacturing partners that we have in all parts of the world. And we’ve got plenty of excess capacity right now in our U. S. Manufacturing partners, of course as we grow and scale, we can onboard and do, you know, routinely onboard more, so I feel very ready right now, I think we’ve got the right network, the right set of partners, and we are ready to grow.

Greg Palm, Analyst, Craig Hallum Capital Group: Okay. Alright. Well, best of luck.

Dan Schumacher, Chief Financial Officer, Proto Labs: I’ll leave

Greg Palm, Analyst, Craig Hallum Capital Group: it there. Thanks.

Rob Bedore, President and Chief Executive Officer, Proto Labs: Thanks, Graham.

Conference Operator: Thank you. Our next question comes from the line of Troy Jensen with Cantor Fitzgerald. Please proceed with your question.

Troy Jensen, Analyst, Cantor Fitzgerald: Hey, gentlemen, congrats on the March results.

Dan Schumacher, Chief Financial Officer, Proto Labs: Thanks,

Troy Jensen, Analyst, Cantor Fitzgerald: Maybe to start with you. You’re welcome. Rob, to start with you, just on the push into production, if you guys are successful, will you see it more in factory or network? And the reason I’m asking, guess, I always thought it’d be more on the factory side because I think customers don’t want to qualify the partner that they’re working with, and you guys can control the quality better in the factory versus the network, but it seems like you’re talking up network as the benefit of tariffs or production, excuse me.

Rob Bedore, President and Chief Executive Officer, Proto Labs: Yeah, thanks for the question Troy. So the answer is definitely both, right? We serve customers with production and end use parts out of both our factories and our networks. Actually quite pleased with the quality that comes out of the network partners. This is an area of strength in our model, and we aggressively audit and control quality with our network partners, just as we do within our own factories, right?

We have the same quality standards, right, that we apply across our whole organization. Remember now we’ve got a global operations organization that includes both factory and network, right? So we view that the same way and hold it to those same standards. The answer varies a little bit more as we think about it by service, right? Where, you know, some services we’re going

Dan Schumacher, Chief Financial Officer, Proto Labs: to do

Rob Bedore, President and Chief Executive Officer, Proto Labs: more, likely more production out of the factory, and in others, know, more in the network. But we definitely see it across the board.

Dan Schumacher, Chief Financial Officer, Proto Labs: You know, Troy, I think one other thing to remind you, you know, we think our network is set up as well positioned to do more production type work. We have a more discreet defined base of manufacturing partners that we work with. We’re making sure that we are in contact with our cross docks and the NP is to make sure that the quality of the parts that are coming through is high and that there’s more interaction that a customer can have through some of our digital tools in order to do those production type orders through the network. But I’m going to reinforce what Rob said. It’s a both.

It is both production to the factory and production through the network.

Troy Jensen, Analyst, Cantor Fitzgerald: All right, perfect. Thanks.

Rob Bedore, President and Chief Executive Officer, Proto Labs: And as we’re seeing production grow, that’s how it’s playing out.

Dan Schumacher, Chief Financial Officer, Proto Labs: Okay, perfect.

Troy Jensen, Analyst, Cantor Fitzgerald: And then Dan, just a follow-up for you. I mean, it’s been a while since we’ve had a normal year. Can you remind us like normal seasonality? I always think of Q3 traditionally up sequentially and then Q4 down. Is that the case and are tariffs going to maybe offset that provide growth throughout the year?

Dan Schumacher, Chief Financial Officer, Proto Labs: Troy, I have to laugh when you say what a normal year is because yeah, it’s been a while. Yeah, I mean, know, normally what we end up seeing is Q1, although being up from Q4 is a little bit softer because of coming out of the holidays, that January would be softer from a revenue perspective. So we see kind of that pickup quarter over quarter, which is mainly due to having kind of three months rather than that. And we see maybe flattish as you go Q2 to Q3, if not slightly up, and then it would be down in the fourth quarter really due to the holidays again. So that’s usually what we see.

So Q1 up versus fourth quarter slightly down versus Q2. Q2 sees a pickup. Q3 flat to slightly up and then slightly down for the Q4 due to the holidays.

Troy Jensen, Analyst, Cantor Fitzgerald: Gotcha. You think tariffs have said it this year?

Dan Schumacher, Chief Financial Officer, Proto Labs: Oh my God, Troy. As you said, we haven’t had normal in a long time. I feel good about what our guide is for the second quarter, but it’s a changing landscape. But as Rob said, I mean, we really feel like we’re well positioned both from the number of different fulfillment options we can offer customers as well as our financial strength.

Rob Bedore, President and Chief Executive Officer, Proto Labs: Yeah, and the actions that we’re taking are gaining traction.

Troy Jensen, Analyst, Cantor Fitzgerald: Perfect. Thanks, guys, and good luck going forward.

Conference Operator: Thank you. Our next question comes from the line of James Ricchiuti with Needham and Company. Please proceed with your question.

James Ricchiuti, Analyst, Needham and Company: Hi, good morning. I may have missed it. It may be in your material or you may have said it. What were the network margins in the quarter? I think you said they were down quarter on quarter, but did you say what they were?

Dan Schumacher, Chief Financial Officer, Proto Labs: Yeah, we didn’t specifically say what the margins were, but they were a little over 31% for the network.

James Ricchiuti, Analyst, Needham and Company: Perfect, thank you. So on tariffs, I think I’m trying to get a sense, are you seeing headwinds at all from materials you use? And I mean, it sounds like you’re already evaluating pricing actions. I’m just curious if that’s an issue for you at all.

Rob Bedore, President and Chief Executive Officer, Proto Labs: Yeah, thanks for the question, Jim. I think the strength of our model really helps us here. We’ve got a very robust supply chain for raw materials, and so we’ve been able to mitigate a lot of that, and have not substantial increases in our costs from raw materials as a result of the tariff landscape.

James Ricchiuti, Analyst, Needham and Company: Got it. You’ve had a couple of quarters of declines, I think, year over year in three d printing. I’m wondering how that business aligns with the overall strategy of driving the production parts business. I mean, you alluded to the space market, which just seems like a natural for production and metals additive. But I’m just wondering, is there anything we need to be thinking about as you look at that three d printing portion of the business?

Rob Bedore, President and Chief Executive Officer, Proto Labs: Yeah, thanks Jim. I think you’re thinking about it right. Three d printing is certainly, we do a bunch of production in three d printing, but still the majority of that service is really a prototyping service, right? And in the macro economy that we’ve been experiencing for the last two years now, with manufacturing contraction, what we’re hearing from customers is that they’re not launching as many new products in this environment, they’re slower to do that, and so we are seeing headwinds to prototyping overall. And that was the reason why we drove the big pivot that we did in order to focus on production, and we’re seeing very nice growth in production, pretty well across the board, including in the three d printing segments, that tie to production.

But right now, in this economy, there’s definitely a headwind for prototyping and I think that’s affecting our three d printing business.

James Ricchiuti, Analyst, Needham and Company: Got it. Last question, if we think about the production parts opportunity, there’s some more mature manufacturing markets that you guys obviously are going after. I’m wondering, there’s probably some ingrained culture using traditional methods. Are you satisfied with how the strategy is playing out in those markets? Obviously, some of the more nimble markets like commercial space, I would think there’s good momentum there.

Rob Bedore, President and Chief Executive Officer, Proto Labs: Yeah, thanks. So what we’re seeing is that we’ve got a very differentiated offering that competes really well in the higher margin portions of the production landscape that we target, those are the low to mid volume production kinds of parts of the space. Because of our high levels of automation, digitalization, scalability, flexibility, we’re pretty uniquely positioned in production in those categories, and again those are kind of the higher margin categories, so we like that. Certainly by industry, where we tend to penetrate fastest, is in those industries where they’re launching more new products. Because that’s where we get to be at the table, right?

When they’re launching the new product and developing the supply chain to produce that product, that’s where we have great opportunities. And so I think that’s why you’re seeing that. But over time I fully expect us to be penetrating through production well in all the industries because we’ve really got a differentiated production offering in the parts of the industry that we’re targeting.

James Ricchiuti, Analyst, Needham and Company: Thanks, guys. Congrats.

Rob Bedore, President and Chief Executive Officer, Proto Labs: Thank you.

Dan Schumacher, Chief Financial Officer, Proto Labs: Thanks, Chip.

Conference Operator: Thank you. And ladies and gentlemen, we have reached the end of the question and answer session. And this does conclude today’s conference. You may disconnect your lines at this time. We thank you for your participation.

This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.