Earnings call transcript: Cactus Inc Q4 2024 results meet expectations

Cactus Inc (NYSE:WHD) reported its Q4 2024 earnings, showing earnings per share (EPS) of $0.71, matching analyst forecasts. Revenue for the quarter was $272 million, slightly below the anticipated $276.84 million. Following the earnings release, Cactus’s stock dropped by 7.85% in after-hours trading, closing at $57.19, reflecting investor concerns about the revenue miss and market conditions. According to InvestingPro analysis, the company maintains a "GREAT" financial health score of 3.2 out of 5, with current analysis suggesting the stock is trading near its Fair Value.

Key Takeaways

• Cactus’s EPS met expectations at $0.71, but revenue fell short.
• Stock price declined by 7.85% after the earnings announcement.
• Record revenue year for 2024, bolstered by Flexsteel contributions.
• New product launches and facility expansions are underway.
• The company maintains a strong cash position with $343 million.

Company Performance

Cactus Inc reported a record revenue year in 2024, largely due to contributions from its Flexsteel acquisition. However, Q4 2024 revenue of $272 million marked a 7.2% sequential decline. The company is focusing on expanding its product offerings and international reach, with new production facilities in Vietnam and advancements in its Spoolable Technologies segment.

Financial Highlights

• Revenue: $272 million, down 7.2% sequentially.
• Adjusted EBITDA: $93 million, down 7.6% sequentially.
• Adjusted EBITDA Margins: 34.1%.
• Cash Balance: $343 million, increased by $39 million in Q4.
• Quarterly Dividend: $0.13 per share.

Earnings vs. Forecast

Cactus met EPS expectations with a reported $0.71. However, revenue fell short of the forecasted $276.84 million, resulting in a negative surprise of approximately 1.7%. This shortfall, although minor, contributed to the negative market reaction.

Market Reaction

Cactus’s stock fell 7.85% in after-hours trading, closing at $57.19. This decline reflects investor concerns over the revenue miss and broader market uncertainties. The stock remains within its 52-week range, with a low of $44.57 and a high of $70.01. Analyst consensus from InvestingPro shows price targets ranging from $51 to $77, with the company maintaining strong returns on equity of 21% and invested capital of 24%.

Outlook & Guidance

For Q1 2025, Cactus anticipates flat to slightly increased revenue in its Pressure Control segment, with EBITDA margins projected between 33-35%. The Spoolable Technology segment is expected to see a mid to high single-digit revenue decline. The company aims for a long-term goal of 40% international revenue contribution and plans capital expenditures of $45-55 million for 2025.

Executive Commentary

CEO Scott Bender highlighted the record revenue achievement in 2024, emphasizing customer loyalty as a key driver. He noted the company’s efforts to diversify revenue streams and expand its product offerings, particularly with the new H2S service product and international market focus.

Risks and Challenges

• Supply chain disruptions could impact production timelines.
• Changing trade policies pose uncertainty for international operations.
• Market saturation in the U.S. may limit growth opportunities.
• Fluctuations in natural gas prices could affect demand.
• Tariff impacts on manufacturing costs remain a concern.

Q&A

During the earnings call, analysts inquired about potential tariff impacts, strategies for managing production across multiple facilities, and the market potential of the new H2S product. Concerns were raised about U.S. market activity and growth potential, reflecting broader industry uncertainties.

Full transcript - Cactus Inc (WHD) Q4 2024:

Conference Operator: Good day and thank you for standing by and welcome to the Cactus Q4 twenty twenty four Earnings Call. At this time, all participants are in a listen only mode. After the speakers’ presentation, there will be a question and answer session. And please be advised that today’s conference is being recorded. I would now like to hand the conference over to your speaker today, Alan Boyd, Director of Corporate Development and Investor Relations.

Please go ahead.

Alan Boyd, Director of Corporate Development and Investor Relations, Cactus: Thank you, and good morning. We appreciate you joining us on today’s call. Our speakers will be Scott Bender, our Chairman and Chief Executive Officer and Jay Nutt, our Chief Financial Officer. Also joining us today are Joel Bender, President Steven Bender, Chief Operating Officer Steve Tadlock, CEO of Flexsteel and Will Marsh, our General Counsel. Please note that any comments we make on today’s call regarding projections or expectations for future events are forward looking statements covered by the Private Securities Litigation Reform Act.

Forward looking statements are subject to a number of risks and uncertainties, many of which are beyond our control. These risks and uncertainties can cause actual results to differ materially from our current expectations. We advise listeners to review our earnings release and the risk factors discussed in our filings with the SEC. Any forward looking statements we make today are only as of today’s date, and we undertake no obligation to publicly update or review any forward looking statements. In addition, during today’s call, we will reference certain non GAAP financial measures.

Reconciliations of these non GAAP measures to the most directly comparable GAAP measures are included in our earnings release. With that, I’ll turn the call over to Scott.

Scott Bender, Chairman and Chief Executive Officer, Cactus: Thanks, Alan, and good morning to everyone. As we concluded 2024, our business continued to outperform with revenue and earnings performance for the full year outpacing industry activity levels that have been softening for the past two. Our organization’s performance continues to demonstrate the inherent characteristics that make Cactus one of the most resilient and high return oilfield service businesses, including a low fixed cost base and a flexible supply chain. Our relentless focus on safety, cost control and execution for our customers and offering differentiated efficiency enhancing and highly engineered products and services. We finished the year with solid margin performance in both segments despite fourth quarter revenue declines due primarily to seasonality.

Fourth quarter total company highlights include revenue of $272,000,000 adjusted EBITDA of $93,000,000 adjusted EBITDA margins of 34.1% we paid a quarterly dividend of $0.13 per share and we increased our cash balance to $343,000,000 I’ll now turn the call over to Jane Nutt, our CFO, who will review our financial results and following his remarks, I’ll provide some thoughts on our outlook for the near term before opening the lines for Q and A. So, Jay?

Jay Nutt, Chief Financial Officer, Cactus: Good morning. As Scott mentioned, total Q4 revenues were $272,000,000 which were down 7.2% sequentially. The revenue decline was a bit more than we had anticipated in our spoolable technology segment guidance as the stronger performance experienced in October was not sustained through the end of the year. Total (EPA:TTEF) adjusted EBITDA of $93,000,000 was down 7.6 sequentially. For our Pressure Control segment, revenues of $177,000,000 were down 4.5% sequentially, driven primarily by decreased customer activity and reduced shipments of production equipment as anticipated.

Operating income decreased $1,700,000 or 3.3 percent sequentially with operating margins increasing 40 basis points due to the non recurrence of miscellaneous charges incurred during the third quarter, offset by lower operating leverage in the quarter. Adjusted segment EBITDA decreased $500,000 or 0.8% sequentially with margins increasing by 130 basis points due to the reasons previously noted. For our spoolable technology segment, revenues of $96,000,000 were down 11.2% sequentially due to lower customer activity levels in the back half of the seasonally slow quarter. Operating income decreased 7,400,000 or 22.4% sequentially with operating margins decreasing three eighty basis points due to some ongoing higher input costs and reduced operating leverage. Operating income is inclusive of $4,000,000 of intangible amortization expense.

Adjusted segment EBITDA decreased by $7,300,000 or 17.1% sequentially, while margins decreased by two sixty basis points. Corporate and other expenses were $5,900,000 down $2,800,000 sequentially due to the non recurrence of professional fees incurred during the third quarter related to growth initiatives. Adjusted corporate EBITDA was flat in Q4 at $4,100,000 of expense. On a total company basis, fourth quarter adjusted EBITDA was $93,000,000 down 7.6% from $100,000,000 during the third quarter. Adjusted EBITDA margin for the quarter was essentially flat at 34.1%.

Adjustments to total company EBITDA during the quarter include a non cash charge of $6,900,000 in stock based compensation and $3,200,000 gain related to revaluation of the tax receivable agreement. Depreciation and amortization expense for the quarter was $15,000,000 including the $4,000,000 of amortization expense related to intangible assets resulting from the Flexsteel acquisition. During the fourth quarter, the public or Class A ownership of the company averaged 85% and ended the quarter at 86%. GAAP net income was $57,000,000 in the quarter versus $62,000,000 during the third quarter. The decrease was largely driven by lower revenues in both segments, which offset the gain related to the revaluation of the TRA.

Book income tax expense during the fourth quarter was $19,000,000 resulting in an effective tax rate of 24%. Adjusted net income and earnings per share were $57,000,000 and $0.71 per share respectively versus $63,000,000 and $0.79 per share in the third quarter. Adjusted net income for the fourth quarter and full year 2024 was net of a 26% tax rate applied to our adjusted pretax income. During the fourth quarter, we paid a quarterly dividend of $0.13 per share, resulting in a cash outflow of approximately $10,000,000 including related distribution to members. We also made the final cash TRA payment of $6,300,000 associated with the 2023 taxes during the quarter.

We ended the year with a cash balance of $343,000,000 a quarterly increase of approximately $39,000,000 The cash build was a little bit lower than our usual cadence in part due to lower quarterly income, a build of raw material inventory in our spoolable technologies business following several missed opportunities in the second half of twenty twenty four and in anticipation of robust sales levels in 2025. Additionally, pressure control inventory balances remained elevated as inventory was increased through the third and fourth quarters due to uncertainty regarding potential post strike activities and the possible implementation of new tariffs. CapEx was approximately $11,000,000 during the quarter and net CapEx for the full year was approximately $35,000,000 near the midpoint of our guidance provided in October. In a moment, Scott will give you our first quarter operational outlook, Some additional financial considerations when looking ahead to the first quarter include an effective tax rate of 22% and an estimated tax rate for adjusted EPS of approximately 26%. Additionally, we made a cash tax payment and associated distributions of approximately $25,000,000 in January that was related to deferred estimated twenty twenty four federal taxes.

This deferral was allowed under IRS disaster relief provisions after Hurricane Burrow affected the Houston area in June of last year. This deferral benefited our third and fourth quarter twenty twenty four cash balances. Total depreciation and amortization expense for the first quarter is expected to be $15,500,000 with 7,000,000 associated with our Pressure Control segment and $8,500,000 in spoolable technologies. Our full year 2025 CapEx expectations are in the range of $45,000,000 to $55,000,000 The increase from 2024 is due to increased spending on equipment upgrades and efficiency improvements at Flexsteel’s Baytown manufacturing facility together with international supply chain diversification efforts, including a $6,000,000 supply chain investment made in January that was originally planned for 2024 to mitigate tariff costs. Finally, the Board has approved a quarterly dividend of $0.13 per share, which will be paid in March.

This covers the financial review and I’ll now turn the call back over to Scott for his comments about the first quarter outlook.

Scott Bender, Chairman and Chief Executive Officer, Cactus: Thank you. Pardon me. Thanks, Jay. I’ll now touch on our expectations for the first quarter by reporting segment. During the first quarter, we expect Pressure Control revenue to be flat to up versus the $177,000,000 reported in the fourth quarter.

This view is based on strong January results in combination with modestly increasing customer activity levels expected through the end of the first quarter. Adjusted EBITDA margins in our Pressure Control segment are expected to be 33% to 35% for the first quarter. This adjusted EBITDA guidance excludes approximately $3,000,000 of stock based comp expense within the segment. As you would expect, we are closely monitoring the supply chain impact of recently announced tariff adjustments, particularly as they relate to our Chinese production facility. The details remain fluid, making the impact difficult to quantify.

But at this time, we believe that our cost profile will be impacted by additional tariffs on goods imported from The U. S. Into The U. S, I’m sorry, from our Chinese facility, which will be incremental to the existing Section three zero one tariffs. These additional tariff expenses when implemented will impact the entire U.

S. Industry as tariffs will be applied to all steel and derivatives regardless of the countries of origin. As a reminder, our Bossier City manufacturing facility is the industry’s largest U. S. Manufacturer of API 6A equipment and we currently build approximately half of our equipment at that facility.

I’m pleased to share that the location of our new low cost production facility is in Vietnam. We placed our first orders from this facility and expect modest shipments to begin in the second quarter before ramping up in the back half of the year once we obtain our API 6A accreditation. From our current understanding, this facility will also be impacted by the new tariffs, but at a significantly lower rate than our Chinese production facility demonstrating the benefits of supply chain diversification. We believe our unique combination of production facilities will ensure that we remain a flexible and low cost producer committed to delivering for our customers. Regarding our spoolable technology segment, we expect first quarter revenue to be down mid to high single digits relative to the fourth quarter due to extended seasonality as our customers were slow to increase activity through January.

Historically, the first quarter has been the lowest revenue quarter of the year. In 2024, international orders were the primary driver of a sequential increase in the first quarter. We are however experiencing a meaningful rebound in order activity in February and early indications suggest that customer activity is building and that the second and third quarters of twenty twenty five will be strong. This year, we will be introducing a product qualified for H2S service, which will increase our addressable market, particularly in the most active international regions. In addition, we ship product to a mining customer and a shallow water offshore customer in the fourth quarter and we expect continued opportunities in these areas.

Additionally, increased shipments to a major midstream customer contributed to our record sales in 2024 and such shipments are expected to continue to grow in 2025. Finally, our international opportunity list continues to expand and supports our confidence towards achieving our long term goal of 40% international revenue contribution. We expect EBITDA margins to be approximately 35% to 37% in Q1, which excludes $1,000,000 of stock based comp in the segment. Lower operating leverage is the primary driver for the anticipated margin decline. As a reminder, 100 of Flexsteel pipe is manufactured in Baytown, Texas using domestically sourced coils.

So we do not expect the same direct tariff cost impacts in this segment, although upstream supply chain impacts are still being determined. Adjusted corporate EBITDA is expected to be a charge of approximately 4,500,000 in Q1, which excludes $2,000,000 of stock based comp. We’ve made real progress on our international expansion plans and remain focused on establishing an international business in a disciplined manner. We continue to dedicate significant resources in both segments to international revenue diversification. In conclusion, I remain very pleased with both of our business segments’ performance.

2024 was a record revenue year for Cactus as the first year with a full contribution from Flexsteel and both segments outperformed lower average industry activity levels year over year. Trade policy uncertainty and customer consolidations still present risk to The U. S. Oil and gas industry, but we have successfully addressed such challenges before. Importantly, our customers have historically supported our responses to such matters.

In 2025, we remain focused on ramping up our Vietnam production facility, introducing new value enhancing products in both segments, continuing to win new customers, expanding internationally and managing our manufacturing cost profile. With that, I’ll turn it back over to the operator and we may begin Q and A. Operator?

Conference Operator: Thank you. Our first question comes from the line of Stephen Juenger of Stifel. Your line is now open.

Stephen Juenger, Analyst, Stifel: Thanks. Good morning, everybody.

Scott Bender, Chairman and Chief Executive Officer, Cactus: Good morning to you. How are you?

Stephen Juenger, Analyst, Stifel: Thanks. I’m well, thanks. So I guess two things. I guess I’d start with when we think about the activity outlook in The U. S, how are you guys thinking about the activity over the next few quarters in The U.

S. Market? And maybe as part of that, do you think you can outgrow underlying activity?

Scott Bender, Chairman and Chief Executive Officer, Cactus: I would let me answer your last question first and that answer is yes. We’re continuing to add new customers and I feel comfortable that we’ll continue to do so. I think that this of course, my estimate of The U. S. Rig count sort of predates what’s going on right now with trade policy.

And I don’t think this trade policy is I’m sure you’d agree it’s not clearly constructive. We were anticipating overall U. S. Onshore rig count in the $5.5 to $5.6 range. I was probably well, I wasn’t probably, I was encouraged that there was upside based upon some renewed activity in the natural gas regions, which we’ve begun to see.

And then believe it or not in the Bakken and in the Mid Continent areas. Now we’re all concerned about the uncertainty that’s going to follow from these ever changing trade policies. So I guess the short answer is, yes, I’m confident that whatever it is, whatever happens to U. S. Activity levels that we will outperform those.

Stephen Juenger, Analyst, Stifel: Great. That’s good color. Thanks. And then I guess the other question, it might be harder to kind of crystallize, but at a high level when you think about the Bossier City facility versus China, just I know you’ve had some comments around this in the past. I’m trying to remember sort of the margin headwind that that created a couple of years back.

I want to say it was about 100 to 200 basis point margins on the legacy Cactus business when you sort of switch over to Bossier versus China? Is that in the ballpark?

Scott Bender, Chairman and Chief Executive Officer, Cactus: Steve was the CFO at that time. I can just tell you on a comparative basis in terms of cost, Bossier was at least 35% higher than our Far East supply chain. So keep in mind that as the tariffs increase for imported steel, be it China or wherever, Vietnam or Europe, that U. S. Steel prices are also going to increase.

And that means Bossier costs are going to increase as well. To what extent, I don’t know, but you can anticipate they’re going to be pretty close to whatever sort of the weighted average of steel prices is that are being imported internationally. But let’s face it, that’s why The U. S. Steel producers have pushed so hard on steel and aluminum.

Stephen Juenger, Analyst, Stifel: Makes sense. And just a quick

Scott Bender, Chairman and Chief Executive Officer, Cactus: So think about 35%.

Stephen Juenger, Analyst, Stifel: Okay. Thank you. And just a quick follow-up to that and then I’ll turn it back is, do you think given what you’re seeing in the end market and given how public these tariff situation is that you can offset that with, let’s call it, cost recovery versus price?

Scott Bender, Chairman and Chief Executive Officer, Cactus: I would be very disappointed if our customers didn’t support us in this.

Stephen Juenger, Analyst, Stifel: Thank

Scott Bender, Chairman and Chief Executive Officer, Cactus: you. Okay. But time will tell. Exactly. Let’s put

Stephen Juenger, Analyst, Stifel: it in

Scott Bender, Chairman and Chief Executive Officer, Cactus: place. I just need to add something. Our customers have always been very loyal to us because we’ve been very loyal to them. We’ve never taken advantage of them. We’re very transparent in what we do and why we do it.

And I’ve been gratified by the way they’ve supported us in the past.

Stephen Juenger, Analyst, Stifel: Great. Thank you for all the detail.

Conference Operator: Thank you so much. And one moment for our next question. Our next question comes from the line of Arun Jayaram of JPMorgan Securities. Your line is now open.

Arun Jayaram, Analyst, JPMorgan Securities: Yes, good morning. Good morning. How are you? I’m doing well, doing well. I did have maybe a follow-up on the tariff discussion.

Jay mentioned that you’re going to do a $6,000,000 supply chain investment in 1Q maybe to mitigate the impact from the tariffs. But maybe you could talk about what the game plan will be on a go forward basis, just given the fact that you do have flexibility now between Vietnam and Bossier City to kind of mitigate that impact as you move forward?

Scott Bender, Chairman and Chief Executive Officer, Cactus: My answer would probably have to go beyond just simply responding to your question. I think that not just Cactus, but given that we have the largest domestic supply chain capabilities in the industry, there is not a whole lot of spare capacity here. There are not enough people. There is not the domestic forging capacity has gone from this country and much of it that remains has pivoted towards it won’t surprise you to hear the military applications. So if you were to go into some of the larger historically oilfield service forgers, you’re going to see things that perhaps are destined for Ukraine or places like that or could be the Mideast.

You’re not going to see a whole lot of oilfield service material for obvious reasons. So there is a just a limit to how much more we can ramp up Bossier. And interestingly enough, although you didn’t ask the question, we are busier today in Bossier than we were in 2024. So now let me pivot over to Vietnam. What we expect to see is this is a vertical manufacturing facility that we’re putting in.

So we would expect to see Vietnam would begin to take over supplying our needs in The U. S. And our Chinese facility will take over responsibility for international demand. So I think I may have mentioned before that when we first designed the facility in Vietnam, I didn’t mention Vietnam, we did design a facility that was capable of handling the entirety of our U. S.

Demand.

Arun Jayaram, Analyst, JPMorgan Securities: Interesting. And then maybe just that $6,000,000 investment, I was kind of no, it was clear. That $6,000,000 supply chain investment, could you just highlight that?

Scott Bender, Chairman and Chief Executive Officer, Cactus: Yes. So first of all, we already made initial investments in 2024, but the $6,000,000 this additional $6,000,000 was slated for 2024. So it got postponed to 2025 and it’s made right now. This will provide us with vertical manufacturing capabilities. So think about Suzhou, the way we develop Suzhou with a modest amount of capital investment, plus the fact that we’re going to be far more vertical in our supply.

Arun Jayaram, Analyst, JPMorgan Securities: Understood.

Scott Bender, Chairman and Chief Executive Officer, Cactus: Did I confuse you again?

Arun Jayaram, Analyst, JPMorgan Securities: No, no, no, that’s helpful. And maybe just my follow-up, I want to get more details. You talked about at Flexsteel, the ability now to address H2S solutions. And I was wondering maybe if you could comment, is that product commercialized and maybe discuss maybe some of the growth opportunities from that product?

Scott Bender, Chairman and Chief Executive Officer, Cactus: Yes. I’ll let Steve go into the details, but it is commercialized. We’re shipping with Stevens. Can we get our first shipment?

Steve Tadlock, CEO of Flexsteel, Cactus: Yes. Our first shipment will be March or April and that will be to a U. S. Customer. And we have some other U.

S. Customers interested. Really, I mean the bigger addressable market for us is in The Middle East where most oil production at least for our pressures and diameters is sour. So our prior Middle East sales have been more in the water injection area and some other corrosive applications, but not H2S and oil production. So we’re excited about that.

As we mentioned on the call, we think that supports the eventual 40% international contribution that we’re shooting for from Flexsteel in the grand scheme of things.

Arun Jayaram, Analyst, JPMorgan Securities: Great. Thanks gentlemen.

Conference Operator: Thank you so much. And our next question comes from the line of Scott Gruber of Citigroup (NYSE:C). Your line is now open.

Scott Bender, Chairman and Chief Executive Officer, Cactus: Yes, good morning. Good morning, Scott. How are you doing? Hey, good

Scott Gruber, Analyst, Citigroup: day to day. Appreciate you guys getting on.

Scott Bender, Chairman and Chief Executive Officer, Cactus: I’m having Scott, can you speak up a little bit? I can hear you. Yes, I hear you better now. That’s because Alan just turned the volume up. Thanks.

Scott Gruber, Analyst, Citigroup: Great, great. So staying on Schoolables, can you just provide a bit of color on how the Schoolables share is evolving in The U. S? When you bought the business a couple of years ago, you had talked about upside to share and production lines and gathering lines. So I want to see how that’s evolving.

And if completion activity is kind of flattish this year, how should we think about spoolables growth in 2025 in The U. S? And then touch on the international growth potential as well?

Steve Tadlock, CEO of Flexsteel, Cactus: Yes. Well, 2024 as a whole was a record revenue and 2023 at least from a Cactus reported standpoint, we didn’t have January and February in there, but we were up. When we look back at the prior owners, we were up about 4%, I think, total revenues. And some of that was due to international growth that we talked about on the last call and we just we’re talking about now. But that’s we’re pretty pleased with that.

That indicates that we were growing share in The U. S. Despite what was the rig count reduction 13% or so year over year. So we feel very good about our positioning. We continue to expand particularly on the larger diameters.

I think with some of the deeper longer laterals, It pushes people probably to higher diameters and pressures where we tend to have less competition and start running into steel more. So if you’re looking for a spoolable alternative, it benefits us there as as well as with some of the bigger field developments that we see. So overall, we’re very pleased with it. Like we said, we had a record fourth quarter. I think obviously we wish our guide had been a little bit different.

We just were projecting off of an extremely strong October and activity fell off further than we anticipated. I guess Q1 is typically our weakest quarter as steel construction gets off to a slow start, but we’re seeing the ramp up from January to February like we’d expect. So we don’t have any true activity concerns. Customers are telling us that in many cases 2025 activity at least over the last couple of months, they’ve been telegraphing that it should be up. And as far as international awards, they’re just lumpier, harder to project.

They tend to be at a minimum $1,000,000 typically on the higher side for us recently more in the $5,000,000 to $6,000,000 So last year in 2024 in Q1, we benefited from an almost $5,000,000 international order. We don’t have that this year. So that’s kind of puts us where we are. But overall, I’m feeling very bullish about our prospects, But we have to contend with the market. So we just take what the market gives us, but we’re trying to expand our portfolio as we talked about, and then target other areas of growth.

Scott Gruber, Analyst, Citigroup: Yes. And the H2S product is interesting. How long would it take a product like that to get qualified for sale in The Middle East and has that process begun?

Scott Bender, Chairman and Chief Executive Officer, Cactus: Yes. So it is qualified

Steve Tadlock, CEO of Flexsteel, Cactus: to API for certain pressure and diameter ranges currently. We’re working on further qualification. As far as Middle East qualifications, you always have some country specific qualifications and we’re working through those now. But it’s not Or in the middle of it. Yes, we’re in the middle of it.

It’s not a multi year process by any means. This should be working towards the business.

Scott Bender, Chairman and Chief Executive Officer, Cactus: Got it. I appreciate the color. I’ll turn it back. Thank you.

Conference Operator: Thank you so much. And one moment please for your next question. And we have a follow-up question from Stephen Gengaro of Stifel. Your line is now open.

Stephen Juenger, Analyst, Stifel: Thanks for taking another question. When we think about the pressure control side, how should we think about the international growth as far as where you stand right now in opportunities, I imagine, probably in Argentina and also in The Middle East and just kind of where you stand on that progress?

Scott Bender, Chairman and Chief Executive Officer, Cactus: My general counsel is looking at me right now. Don’t ask me that question. I said in a narrative that we made real progress and we have made real progress. So I really need to leave it at that.

Stephen Juenger, Analyst, Stifel: Okay. Okay.

Scott Bender, Chairman and Chief Executive Officer, Cactus: Look, I think everybody on this call knows that we’ve never lied to anybody and we’re not going to start now.

Stephen Juenger, Analyst, Stifel: Got you. That makes sense. I’m still modeling it as a U. S. Business until we but I was just curious if you could give more color, but I appreciate that you can’t right now.

Conference Operator: Thank you.

Stephen Juenger, Analyst, Stifel: Thank you. Thank you.

Conference Operator: Thank you so much. And there are no further questions at this time. I would now like to turn the conference back to Scott Bender, Chairman and CEO, for closing remarks.

Scott Bender, Chairman and Chief Executive Officer, Cactus: Okay. I just want to thank everybody for your support. Thanks for joining us. This team worked really, really hard this year. We’re working even harder this year.

This my hope is that 2025 will be a transformative year for the company as a whole. And we’re doing everything in our power to ensure that that happens. So everybody have a good day. Thanks for joining us.

Conference Operator: Thank you, presenters. And thank you, ladies and gentlemen. This concludes today’s conference call. Thank you for participating and you may now disconnect. Have a good day.

This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.